MartinC
私のコンテンツ
すべてのメッセージ
レビュー
コメント
回答
質問

すべてのメッセージ

MartinC 10/04/2019
Used this for the first time today, worked far better than I expected, laser printed a small circuit, taped it to pcb material that had been cleaned with alcohol following cleaning with fine steel wool and then ironed it in place. The backing paper peeled clean off and left an accurate pcb mask on the copper. I etched with ferrous chloride and was left with a perfect pcb. Only criticism was that the paper was poorly protected in the post and `i had to leave it under a heavy weight for a few days to flatten it to an acceptable level to be used in my HP laser printer. I found that my printer will take these A4 sheets cut into quarters, i.e. A6. this makes it a lot more economical to use. My next experiment is to see if it can be re used for another copy of the circuit. I will definitely be buying more of this in the future.
DIY電子プロトタイプMak PCB回路ボードのための10枚のA4シートヒートPCB熱転写紙トナー
US$3.49 US$4.49
1
推奨事項
コメント (0)
MartinC 12/02/2019
I use these with salvaged Li-ion/ Li-Po cells along with a small boost converters to power LED’s in 3D printed light fittings and displays.
10個のTP4056マイクロUSB 5V 1Aリチウム電池充電保護ボードTE585 Lipoチャージャーモジュール
US$9.99 US$11.99
0
推奨事項
コメント (0)
MartinC 25/03/2019
These are a direct replacement for Gilllette blades and seem just as good only a fraction of the price.
GFLV®16ピース5層ブレードシェービングカミソリシェーバーヘッドジレット用交換用
US$19.99 US$29.99
0
推奨事項
コメント (0)
MartinC 29/05/2019
excellent little lights, quite bright on full brightness but even on a lower setting to conserve battery life the are bright enough to achieve a good effect. remote control works well and at a reasonable range. haven’t tried submerging them yet but have been left outside for a week in heavy rain with no ill effects.
10Xリモコン防水RGB水中LEDキャンドル茶ライトテーブルランプの装飾
US$12.33 US$13.67
0
推奨事項
コメント (0)
MartinC 01/08/2019
neat little module, easy to set up and use.
Arduino用3個DS3231 AT24C32 IIC RealタイムクロックモジュールGeekcreit-公式Arduinoボードで動作する製品
US$5.63
0
推奨事項
コメント (0)
MartinC 01/08/2019
neat little unit. does what I need it to.
Geekcreit® LCR-T4 12864 LCD グラフィカルトランジスタテスタ 抵抗容量ESR SCRメーター
US$12.99 US$17.99
0
推奨事項
コメント (0)
MartinC 01/08/2019
As described. fit breadboards well.
120個の20cmのオスからオスのカラーブレッドボードジャンパーケーブルデュポンワイヤ
US$5.99 US$6.99
0
推奨事項
コメント (0)
DC-DC調整可能電源バックコンバータ降圧モジュール
US$7.99 US$9.99

Q: What is the EN pin on the input for?

尋ねた MartinC に 2019-04-18 01:57:42

APteH EN is chip enable. A high is Enable, low is disable

2019-05-20 06:42:31 役に立つ (2)
提出
回答 (3)
MartinC 10/04/2019
Perfect for cleaning up holes in models that have been 3D printed. I now deliberately make the holes a fraction smaller than needed so that I can use this tool to achieve perfect holes.
Raitool™DT01エッジリーマー　専門リーミングナイフユニバーサルホール　ドリルツール　0-14mm
US$7.99 US$9.99
0
推奨事項
コメント (0)
MartinC 25/03/2019
excellent for micro controller projects suck as arduino controlled lighting.
5V 1チャンネルレベルトリガーオプトカプラリレーモジュール
US$2.99 US$8.99
0
推奨事項
コメント (0)
MartinC 25/03/2019
excellent. use them for running esp8266 based projects from mains supply. such as Alexa controlled sockets and lights.
3個の5V 700mA 3.5W AC-DCステップダウン絶縁スイッチング電源モジュール
US$9.99 US$11.99
0
推奨事項
コメント (0)
MartinC 25/03/2019
exactly what they claim to be, good selection of cheap resistors. you just need to find an appropriate method of storage as they are just strips of resistors.
1000Pcs 5％1 / 2W 0.5W金属フィルム抵抗器50値アモートキット0.1Ω〜4.7MΩコンデンサ
US$13.99 US$16.99
0
推奨事項
コメント (0)
MartinC 12/02/2019
I used one of these to repair a faulty touch sensitive lamp and it fitted as a direct replacement. This has 3 light levels as opposed to just the on/off unit that it replaced. Be aware that it is not suitable for led or cfl lamps, just filament or halogen bulbs. I think that is how the original one was destroyed.
AC 220V3ウェイタッチコントロールセンサースイッチ調光ランプデスクライトパーツ
US$7.99 US$10.99
0
推奨事項
コメント (0)
MartinC 09/02/2019
Used this to power an LED display light, measured capacity appears to be 1750 mAh when measured using a TP4056 as charge controller and discharging at a current of 40 mA.
Eachine EV800 FPVゴーグル　スペアパーツ 　 3.7V 2000mAhリポ バッテリー
US$11.41 US$13.69
0
推奨事項
コメント (0)
MartinC 16/10/2018
I have bought several of these and so far they have all been reliable. I use them with usb led light bars for under cupboard lighting. they get quite warm after prolonged use at 5w output but remain reliable up to now. (about a month of every day use) will definitely order more.
iPhone 6S Plus 　携帯電話　タブレット適用　英国のホームウォール　3ピンUSBプラグ電源アダプタ充電器
US$1.99
0
推奨事項
コメント (0)
MartinC 16/10/2018
this is my second batch of glue, use it for insulating electrical repairs and projects as well as general purpose hobby use. with a variable temperature gun this can be used either hot and very fluid or cooler and bulky, either way it sticks extremely well. can be rather stringy at lower temperatures but not difficult to deal with with practice.
10pcs 11mm x 247mm EVA Clear Hot Melt Glue Adhesive Sticks For Glue Gun
US$6.49 US$15.99
0
推奨事項
コメント (0)
MartinC 28/06/2018
accurate and bright display. use this wiring diagram but ignore the shunt.
デュアルレッドブルーLEDデジタル電圧計電流計パネル電圧計
US$7.50 US$9.00
4
推奨事項
コメント (0)
MartinC 20/03/2018
Especially as these come with the appropriate spare mandrels these make a cheap way of topping up your sanding drums, far cheaper than buying locally and of comparable quality. I use these in a Dremel but I believe they will fit any similar rotary tool. My wife also uses them in her electric nail tool for when she is dealing with acrylic nails. I have bought her her own set so I don't have to keep searching for mine!
102個の120グリットのサンディングドラムキット、1/2、3/8、1/4インチのサンディングマンドレルがDremelロータリーツールにフィット
US$9.99 US$11.99
0
推奨事項
コメント (0)
MartinC 20/03/2018
These are not very sturdy but more than adequate for small components.
5個Geekcreit®24 Value電子部品収納ボックス
US$19.99 US$23.99
0
推奨事項
コメント (0)
MartinC 20/03/2018
I use these when I need to use AA or AAA batteries in 3D printed projects. More than adequate for this purpose, easy enough to include 1s,2s,3s or more cell holders in designs. I have even used them for 18650 cells in low current applications as I don't think they would be up to carrying any more current than a typical AA cell can deliver due to the thin material they are made of.
単4電池用に設定された10のペアシルバートーンメタルバッテリースプリングプレート
US$2.99 US$3.99
0
推奨事項
コメント (0)

あなたは専門家です、あなたは助けることができますか？

招待メールを購読することを心から歓迎します！

購読すると、製品に関する質問に答えるために電子メールで招待されます。購読すると、「役立つバッジ」も獲得できます。プライバシー設定ページでいつでも登録を解除できます。

他の人を助け、幸せになりましょう！

  • 申し込む

バッジについて

バッジはコミュニティに関連しており、ユーザーは質の高いコンテンツを作成したり、ミッションを完了したり、特別なアクティビティに参加したりすることでバッジを獲得します。特定の人には独自の専用バッジもあります。
CEOバッジ

CEOバッジの所有者はバングッドのボス。

獲得できるバッジはまもなく提供されます
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe