buckeyes1997
私のコンテンツ
すべてのメッセージ
レビュー
コメント
回答
質問

すべてのメッセージ

buckeyes1997 13/12/2021
This watch is AMAZING!!! It does everything it says it will do and more. I love the ability to switch the face to various looks depending on what I'm wearing or how I'm feeling. It makes the watch a fashion piece and not just a watch. I like the super bright and vivid display screen which looks fantastic. There are some disappointing features that I should point out.....the blood pressure thing is way off and probably not useful. The watch has a bug and continuously vibrates when using GPS on your phone while tethered (only way to stop is to disconnect phone). The music player is a nice feature and the sound is not great, but does an okay job for A WATCH!!!. The rubber band is decent quality but will likely need to swap to a metal band or something better soon as it'doesn't look like it will last too long, but it does work for now and matches the watch.
[音楽再生] BakeeyZ18ダイナミック1.39インチAMOLEDフルタッチスクリーンBluetooth呼び出し心拍数血圧酸素モニターマルチスポーツモード音楽再生IP67防水ビジネススマートウォッチ
US$72.99 US$146.99
1
推奨事項
コメント (1)
buckeyes1997 20/08/2021
This drone works great. The range is excellent, get 5g rather than 2.4g for more range. The video cuts out before control range ends. Durable construction and excellent overall value.
Eachine E520S GPS WIFI FPV 4K/1080P HDカメラ 16分のフライト時間 折りたたみ式RCドローンクアッドコプター
US$109.99 US$139.99
2
推奨事項
コメント (0)
buckeyes1997 30/08/2021
This kit comes complete with almost everything you need to make it work on an ender 3 V2. There are two issues with the kit as supplied. 1) for the V2 the hot end shroud doesn't work with the included bracket. The included bracket is for the Ender 3 regular printer not the V2. I had to fabricate a bracket from my old bracket and the belt slots don't line up right. 2) the m3x8 screws for the bearing blocks are too long and they should be m3x6 for x and 1 z axis, but are okay for y and motor side z axis. There are NO way instructions so figuring it all out is hard. There are a few YouTube videos that help if you get lost. Overall I'm happy with the kit and it's an upgrade, but not complete as shipped. The BLtouch is a nice bonus for the price!!!!
Creality3D®リニアレールエンダー-3S /エンダー-3用のすべてのキットProレベリングセンサー付き3Dプリンターパーツ
US$119.99 US$172.99
1
推奨事項
コメント (2)

buckeyes1997 they were all the same length.

buckeyes1997 30/08/2021
This kit comes complete with almost everything you need to make it work on an ender 3 V2. There are two issues with the kit as supplied. 1) for the V2 the hot end shroud doesn't work with the included bracket. The included bracket is for the Ender 3 regular printer not the V2. I had to fabricate a bracket from my old bracket and the belt slots don't line up right. 2) the m3x8 screws for the bearing blocks are too long and they should be m3x6 for x and 1 z axis, but are okay for y and motor side z axis. There are NO way instructions so figuring it all out is hard. There are a few YouTube videos that help if you get lost. Overall I'm happy with the kit and it's an upgrade, but not complete as shipped. The BLtouch is a nice bonus for the price!!!!
Creality3D®リニアレールエンダー-3S /エンダー-3用のすべてのキットProレベリングセンサー付き3Dプリンターパーツ
US$119.99 US$172.99
1
コメント (2)
buckeyes1997 27/09/2021
This hot end is EXCELLENT!!! I was having issues with heat creep on my all metal hotend but after installing this unit on my Ender 5 plus I am able to print PLA again without heat creep. The kit comes with all the parts but the printer mount needed modifications before the unit could be mounted. Also it doesn't come with a mount for ender style printers. It looks good and works good so far. I might get a titanium heat break for it to make it even better but I'm happy for now.
V6 Hotendオールメタル3DボルケーノJ-ヘッドボーデンエクストルーダーキット、冷却ファンブラケットブロック1.75ノズル付き、3Dプリンタ用
US$25.99
2
推奨事項
コメント (0)
Eachine E520S GPS WIFI FPV 4K/1080P HDカメラ 16分のフライト時間 折りたたみ式RCドローンクアッドコプター
US$109.99 US$139.99

Q: Good morning, on average, how many days does the product take to arrive in Brazil?

尋ねた BG541718244 に 2021-10-04 07:27:04

buckeyes1997 not sure. it took about 30 days to USA.

2021-10-04 09:08:15 役に立つ (1)
提出
回答 (3)
Bakeey 3 in 1 7mm 6Led Type CマイクロUSBボアスコープ検査カメラSoft Android PC用ケーブル
US$13.99 US$16.99

Q: is it compatible with iOS, iPad Pro?

尋ねた BG191647484 に 2020-12-09 09:21:19

buckeyes1997 I only use with Android and PC.

2021-10-04 09:07:52 役に立つ (1)
提出
回答 (4)
buckeyes1997 27/09/2021
This mount works great and fit my V6 hotend. I like the black anodized aluminum but it scratches easily if you are rough with it.
BIGTREETECH® V6アルミフィックスドブロックアセンブリ、E3D V6ホットエンドボルケーノボウデンエクストルーダーEnder 3 CR10 3Dプリンターパーツ
US$8.99 US$11.32
1
推奨事項
コメント (0)
buckeyes1997 21/09/2021
This item was shipped well and arrived undamaged. I am using this part on my Creality printer as an improvement over the stock part which is starting to make noise. This is not as good as an all ball bearing fan, but it should last long enough at a great price. I plan to pick up a few and keep them on hand.
1個の24V 4010ブロワー冷却ターボファン、7000rpmワイヤー、1.2mの長さ、端子付き
US$2.99
1
推奨事項
コメント (0)
buckeyes1997 21/09/2021
This product is decent. I was afraid it might show up 3D printed but it is actually injection molded plastic. The bearings are cheap and likely won't last but it should work good for a while and the price,/value was good. My only real issue is alignment can be annoying if you don't get it just right or your printer pulls it at an angle and it knocks over. I put sticky tape on the bottom to help prevent that.
Kingroon 独立フィラメントホルダー PLA ABS調整可能な柔軟性を持つ3Dプリンター用
US$7.00
1
推奨事項
コメント (0)
buckeyes1997 21/09/2021
These are great spare temp sensors for Creality or any other 3D printer. the connector on the end is not what I need but it can be cut off easy. These are decent quality at a great price. Having a few of these on hand will prevent downtime.
Anet® 5個NTC 3950 100KΩサーミスタ温度センサー、1.1mケーブル付き、RepRap Prusa i3 3Dプリンター用
US$3.99 US$4.99
1
推奨事項
コメント (0)
buckeyes1997 21/09/2021
These fans really move some air. I am planning to use these on my Creality all metal hot end. it tends to get heat creep when printing low temperature filaments like PLA. Mounting this fan on the upper hot end should keep it cool.
Anet® 2個24V DC 5015 50x50x15mm 2ピン 排気風扇
US$4.99 US$9.99
1
推奨事項
コメント (0)
buckeyes1997 02/09/2021
These boards are great so far. I can easily talk via Windows 10 over USB and work with the Arduino IDE and included libraries. I wish the SD card slot was not positioned between the headers, as that makes insertion hard if soldered long legs down. Overall this is a decent kit with a super powerful wifi chip and nice little lcd display for all my project needs. I primarily bought it for the uSD slot and that works very well.
LILYGO® TTGO T8 ESP32-S2 V1.1 ST7789 1.14インチLCDディスプレイ WIFI ワイヤレスモジュール Type-cコネクタ TFカードスロット 開発ボード
US$21.99
2
推奨事項
コメント (0)
buckeyes1997 09/09/2021
this model is very good. my son has been playing with it non-stop because of the baggie of accessories that came with it. He's not a fan of the orange color but the sward makes up for color. the stand is not very useful and kind of holds him awkward. Overall, the quality is good and the value is cheaper than I could 3D print it myself.
フィグマ2.0デラックスエディションオレンジ色の男性スタイルPVCアクションフィギュアおもちゃ コレクタブルモデルドールズトイ
US$10.99 US$13.99
1
推奨事項
コメント (0)
buckeyes1997 02/09/2021
These are great cheaper Arduino modules. They work great with the IDE and no complaints at all with build quality.
Geekcreit® ATmega328P Nano V3コントローラーボード改良版モジュール開発ボード
US$7.99 US$25.99
1
推奨事項
コメント (0)
1-8S 1.2V-9.6V NiMH NiCd 再充電可能バッテリー充電器モジュールボード 入力 DC 5V
US$5.99 US$10.99

Q: Por favor, alguém me responda se a placa do carregador de baterias, Solter , novacar 20 tem disponível para troca. Essa placa mostruário no site, serve?

尋ねた BG403711442 に 2021-07-15 04:35:39

buckeyes1997 I'm not familiar with that question.

2021-09-02 11:19:31 役に立つ (0)
提出
回答 (1)
NEJE 20WレーザーモジュールDIYキット450nmのプロフェッショナルな連続5.5Wレーザーカット彫刻モジュールブルーライト、レーザーカッティング/彫刻機CNC DIYレーザーと互換性があります
US$131.99 US$158.99

Q: il modulo può essere montato sul laser ortur? ora ho un modula da 7w

尋ねた stefanovecchi に 2021-09-02 03:29:19

buckeyes1997 I'm not sure as I mounted it on my CNC. If you 3D print a mount it should fit on most machines.

2021-09-02 11:09:40 役に立つ (0)
提出
回答 (1)
Creality3D®リニアレールエンダー-3S /エンダー-3用のすべてのキットProレベリングセンサー付き3Dプリンターパーツ
US$119.99 US$172.99

Q: will it fit to ender 3 v2?

尋ねた BG483713441 に 2021-06-02 07:44:05

buckeyes1997 it does fit but the hotend plastic housing doesn't fit the included mount and needs modified. Also some of the 8mm screws should be 6mm to mount the bearings properly. It does work but not perfect. Also the belt alignment on the X is a problem depending on how you mount the hot end.

2021-09-02 11:08:30 役に立つ (1)
提出
回答 (1)
buckeyes1997 09/08/2021
These work great and really speed up project wiring. I use them for outlets, and electronic projects that normally require soldering wires.
10個のスプリングレバープッシュフィット再利用可能なケーブル2線ポール絶縁材
US$5.99 US$7.99
1
推奨事項
コメント (0)
buckeyes1997 28/10/2020
this laser works very well. the optical lens is not the best at focusing the laser but after market mods work better.
NEJE 20WレーザーモジュールDIYキット450nmのプロフェッショナルな連続5.5Wレーザーカット彫刻モジュールブルーライト、レーザーカッティング/彫刻機CNC DIYレーザーと互換性があります
US$131.99 US$158.99
3
推奨事項
コメント (0)

あなたは専門家です、あなたは助けることができますか？

招待メールを購読することを心から歓迎します！

購読すると、製品に関する質問に答えるために電子メールで招待されます。購読すると、「役立つバッジ」も獲得できます。プライバシー設定ページでいつでも登録を解除できます。

他の人を助け、幸せになりましょう！

  • 申し込む

バッジについて

バッジはコミュニティに関連しており、ユーザーは質の高いコンテンツを作成したり、ミッションを完了したり、特別なアクティビティに参加したりすることでバッジを獲得します。特定の人には独自の専用バッジもあります。
CEOバッジ

CEOバッジの所有者はバングッドのボス。

獲得できるバッジはまもなく提供されます
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe