tristanp13
私のコンテンツ
すべてのメッセージ
レビュー
コメント
回答
質問

すべてのメッセージ

tristanp13 27/08/2019
Works great, good value, but be carefull not to reverse power the unit (having the power supply plugged on the module and the battery at the other end, and unplugged the charger). The current flowing from the battery back to the charger ruined the IC on one of my modules... I bough replacement ICs (cheaper than the complete module). I added a N Mosfet on the output +, the gate being connected to the input +. The it is blocked when input voltage is less than V_battery+Vth and avoid reverse current damages.
2個のDC7V-35VからDC1.25V-30VのLEDドライバー充電定電流電圧ステップダウンバック電源モジュール
US$7.99 US$9.99
4
推奨事項
コメント (0)
Creality 3D® Ender-3 ダイレクトドライブ押出キット機構完全な押出ノズルキット ステッパーモーター付き
US$39.99 US$49.99

Q: Are all the part made of metal ? Most importantly the extruder and the brakets holding the motor onto the plate ? Or are these made of plastique as is the stock extruder ? Thanks

尋ねた tristanp13 に 2020-12-28 08:08:20

top_171 Aalavanca do extrusor de plstico, mas possvel trocar

2022-01-16 10:53:40 役に立つ (0)
提出
回答 (3)
Ender-3/Ender-3 Pro/Ender-3 V2用クリエイティビティ3D®デュアルスクリューロッドアップグレードキット
US$39.99 US$49.99

Q: Will this kit fit the ender 3 (pro) ? The kit sold for the ender 3 pro with additional stepper includes extra parts I don't need also that one got just everything. Thanks

尋ねた tristanp13 に 2020-12-24 12:42:24

pasci works well with ender 3 pro.

2021-05-19 07:16:13 役に立つ (1)
提出
回答 (4)
tristanp13 12/06/2020
Come partialy pre-assemble, simple to set up but this needs to be done properly. Getting the upper parts perpendicular is realy not simple, in particular the X axis. The printer is reall good for the price, I did not expect that, the new board makes it really silent, but it is almost pointless since the fans are realy loud.... I need to swap these. A bit a tweaking can lead to reall great print. The glass bed is far better than the magnetic one. The magnetic bed is not perfectly flat so it's almost impossible to level the bed properly. That being said, the glass bed is not perfectly flat either, there are some "gapes" around the corner... The are visible when printing skirts, you see the ho end getting further for 10 or 15 mm. Or it is an issue with one of the Y axis wheels that got flat already on a side, enven though I did take care to not tighten these too much...
Creality3D®カスタマイズバージョンエンダー-3XsPro3DプリンターV4.2.2サイレントメインボード+ガラスプレートプラットフォーム+磁気リムーバブルステッカーキット220x220x250mm印刷サイズ
US$265.99 US$302.99
1
推奨事項
コメント (0)

tristanp13 Thiswould fit into the horizontal bar, not on the vertical one

BG474546161 28/10/2020
today come my order and i tried to mount Up this but the holes Is not correct (Ender 3 V2 frame samé with Ender 3 pro )
Creality 3D CR-10 Enedr-3/Pro 3D プリンター用のアルミニウムZ軸リードスクリューZ-Rodベアリングホルダーとベアリングハウジング
US$8.99 US$14.99
5
コメント (4)
シングルステッパーモーターとデュアルZテンションプーリーセットを備えたデュアルZ軸Creality 3D Ender-3バージョンアップキット
US$39.99 US$73.99

Q: can this work with Ender 3 V2?

尋ねた BG584781557 に 2020-05-24 08:43:55

tristanp13 chungr423 fgs if you don't know the answer just don't post anything finally !

2020-06-13 10:48:19 役に立つ (0)
提出
回答 (2)
tristanp13 12/06/2020
Seems quite soft to me compared to the one I received included with the creality printer. Simple prints went well (calibration cube for insance). But when I print a bit complexe models which cause a lot a retractations, the filament ends up flattened into the extruder and cannot pass through the second hole to enter the bowden tube... Which obviously lead to a scwrewed up print... Maybe it got moisture ? I'll try to set it to dry in a filament soring ox and hope it will become usable again...
Creality 3D® ホワイト/ブラック/イエロー/ブルー/レッド 1KG 1.75mm PLAフィラメント 3Dプリンター用
US$35.99 US$40.99
0
推奨事項
コメント (0)
12Vオートバイスーパーライト防水LEDヘッドライトリアビューミラーライトスポットライト補助ランプ
US$16.99 US$20.99

Q: Did anyone measured the power consumption of these ? Typicaly the amperage under 12VDC ? Thx

尋ねた tristanp13 に 2019-11-17 02:42:45

delianlimujdat ql

2020-04-06 07:34:09 役に立つ (0)
提出
回答 (3)
tristanp13 27/08/2019
Simple PCB, really thin but OK. Did a 1x2 li ion pack with it and work great for now
5個の3.7Vリチウムバッテリ保護基板18650ポリマーバッテリ保護6-12A 4MOS
US$8.99
0
推奨事項
コメント (0)
tristanp13 16/05/2019
Was a bit under confident buying these. My Varadero XLV (125cc) main light is total crap so I won't see anything at night... And it does not really make me visible at daytime as more recent motorcycle. I tried these, they look cool, nothing fancy (no heavy aluminium plate), but do add something to the motorcycle. And they are throwing a BUNCH of light ahead ! I have not tried driving at night, but just on the parking lot. The light I compare to is actually not the main light but the medium one. But the difference is clear... The main light does not in any way achieve something similar.
12Vオートバイスーパーライト防水LEDヘッドライトリアビューミラーライトスポットライト補助ランプ
US$16.99 US$20.99
0
推奨事項
コメント (0)
tristanp13 22/05/2019
Good looking aluminum. Easy to navigate, small guide but complete enough. I'm trying to reveive refurbished 18650 with it. It is charging 4 of them in balance mode. The power supply is labeled as 12V@6A, it seems quite light to me to be able to output that much power. But I don't need it. For 20€ that's good for me =). NB: you can disable the button biping from the menu (that really annoying ^^)
iMAX B6 80W 6A Lipoバッテリーバランスチャージャー（電源アダプター付き）
US$25.99 US$37.99
0
推奨事項
コメント (0)
IPRee™ 5V 7W ポータブル ソーラー パネル アウトドア 旅行 緊急 折りたたみ式 充電器 電源銀行 USBポート付き
US$33.99 US$40.99

Q: is the output voltage controlled to protect overcharging phone?

尋ねた bertg に 2018-01-26 07:30:28

tristanp13 The charger does nothing about overwhrge protection. Your phone does it. Once charged, the phone just stop drawing current from the panel...

2019-06-21 09:14:56 役に立つ (0)
提出
回答 (2)
tristanp13 16/07/2019
not much to say. Seems strong, 18650 fit nicely
3個E1A1ABS 4 x18650用バッテリーボックスホルダー
US$8.99 US$10.99
0
推奨事項
コメント (0)
tristanp13 15/07/2019
Good quality, do the job
ユニバーサルクロスキートレイン電気キャビネットエレベータートライアングルキー
US$13.99 US$16.99
0
推奨事項
コメント (0)
tristanp13 19/06/2019
RAS, ok stuff. Sold with a 10A fuse. Usable right away =)
10A専門力のソケットのヒューズが付いている防水刃のヒューズのホールダー
US$2.04 US$2.20
0
推奨事項
コメント (0)
tristanp13 22/05/2019
Must have with the lipro balanced charger. I used a 5 pins cables to make a 4 battery charger holder
10個のJST-XHコネクター2-6S Imax B6バランス充電ケーブルワイヤーアダプタープラグ10cm
US$8.99 US$10.99
0
推奨事項
コメント (0)
tristanp13 22/05/2019
Seems strong, battery well fitted and hold
プラスチック電池ケースホルダーStorgeボックス4個18650 3.7V充電式電池用DIY
US$11.99 US$13.99
0
推奨事項
コメント (0)
tristanp13 15/05/2019
Really neat for the price, thanks, I got two to be able to prototype little circuitry on each one
テスト DIY 830ポイントのソルダーレスPCBブレッドボード（MB-102 MB102用）
US$4.99 US$8.21
0
推奨事項
コメント (0)

あなたは専門家です、あなたは助けることができますか？

招待メールを購読することを心から歓迎します！

購読すると、製品に関する質問に答えるために電子メールで招待されます。購読すると、「役立つバッジ」も獲得できます。プライバシー設定ページでいつでも登録を解除できます。

他の人を助け、幸せになりましょう！

  • 申し込む

バッジについて

バッジはコミュニティに関連しており、ユーザーは質の高いコンテンツを作成したり、ミッションを完了したり、特別なアクティビティに参加したりすることでバッジを獲得します。特定の人には独自の専用バッジもあります。
CEOバッジ

CEOバッジの所有者はバングッドのボス。

獲得できるバッジはまもなく提供されます
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe