hawkt45
私のコンテンツ
すべてのメッセージ
レビュー
コメント
回答
質問

すべてのメッセージ

hawkt45 01/02/2022
I received this expansion kit, before the SCULPFUN S9 arrived. The kit is very well packet. You get 4 y-axis belts, of which 2 are spare ones, 2 y-axis rails, assembly manual/sketch and an extension cable. This cable has to replace the factory installed cable on the SCULPFUN S9 laser machine, because it is much longer in length. Remove the cover on the controller, via the 4 pan head cap screws, on the rear side. Remove the cable, which has a blue, red, white and blue JST-PH and JST XH plugs. Keep this cable in a safe place. Install the new cable and fit the cover. Thats all.
SCULPFUN S6/S6pro/S9 レーザー彫刻機用エングレービングエリア拡張キット クイックアセンブリ
US$99.99 US$199.99
2
推奨事項
コメント (1)
hawkt45 26/04/2023
This consumables kit is a very nice product to have. I selected a 0.8 mm collet size and was supplied with 12 of them. There is also two gas shields supplied with the brass inner nozzle assembly.
15AK溶接トーチ消耗品14個セット0.6mm 0.8mm 0.9mm 1.0mm 1.2mm MIGトーチガスノズルチップホルダー
US$9.99 US$39.99
0
推奨事項
コメント (0)
hawkt45 26/04/2023
This item does not come with a battery. The battery size is a number CR2032. The scale reading in degrees is very sensitive and an ideal tool for anybody to use. It is shipped in a box and the item is packed inside a nylon pouch. The pouch has two cords on the open end and can be hung op for storage. Thank you Banggood.
ステンレススチール360度ゲージデジタルプロトラクターTビーバーエレクトロニックレベル電池式LCDディスプレイ角度検索スライド
US$13.99 US$32.88
0
推奨事項
コメント (0)
hawkt45 29/03/2023
This is an ideal tool to have. The holder has a magnet inside it,which prevents the various bits,from falling out. The holder is machined from aluminium and has a removable cap,which enables a few,not all bits included,to be stored inside it. The removable cap,can rotate inside the holder,so one's finger can be placed on it and used to rotate the holder,when turning in or out,a screw etc. Ideal for a hobbyist etc. Thankyou Banggood
RCモデル用の12in1マルチ機能ドライバーキットRC修理ツールセット
US$14.99 US$17.99
0
推奨事項
コメント (0)
hawkt45 13/02/2023
This assorted screw set is ideal for assembling 3D printed RC airplanes. The screws are kept together in their own compartment, in a plastic case. A chart is displayed inside the lid, to the corresponding screw length. Very nice indeed. Thank you Banggood.
ボックス付き M2 クロスドライブ平頭自己彼釘ニッケルメッキ炭素鋼木ネジキット M2ねじアソートメントキット800個
US$8.99
0
推奨事項
コメント (0)
hawkt45 19/01/2023
This X-axis upgrade it very good on the Sculpfun S9 and higher speeds can be used, to maintain the same level of accuracy. Very well made and easy to install. Please ensure that you use the supplied extension cable, which reverses the direction of the X-axis stepper motor. This is very important and easy to forget to use.
SCULPFUN S6/S9 X軸リニアガイドアップグレードキット 高精度産業用グレードのリニアガイドキット 直接取り付け、ドリル不要
US$52.99 US$99.99
0
推奨事項
コメント (0)
hawkt45 19/01/2023
Order received in a very short time. Spare belt to be used on GT2 pulleys on 3D printers etc. Thank you Banggood.
5M 2GT-6mm ゴムオープニングタイミングベルト S2M GT2 ベルト 3Dプリンター用
US$9.99 US$18.00
0
推奨事項
コメント (0)
hawkt45 19/01/2023
Order received in a very short time. These little self-tapping screws are perfect for RC planes, boats etc. Thank you Banggood.
ボックス付き M2 クロスドライブ平頭自己彼釘ニッケルメッキ炭素鋼木ネジキット M2ねじアソートメントキット800個
US$8.99
0
推奨事項
コメント (0)
4K WiFi Ultra HD 1080P 16XZOOMデジタルビデオカメラDVカムコーダーレンズとマイク付き
US$24.99 US$29.99

Q: what is in the box? I surprise for the price

尋ねた BG213617433 に 2022-05-13 06:41:38

hawkt45 You must select the options available, before you do the purchase. You can select what you want to receive with the item.

2022-05-24 12:35:49 役に立つ (0)
提出
回答 (2)
SMBB1626 切断ブレードホルダー（カットオフカッター用）パートオフブレードインサート GTN-2 GTN-3 ツーリングツール用
US$38.99 US$46.99

Q: Can this holder fit into a 250-000 tool holder? Thanks.

尋ねた BG056375241 に 2021-08-27 05:20:07

hawkt45 No,you must machine some material off the section, which slides into the tool holder and is secured by means of 3 grub screws.

2022-05-14 02:43:30 役に立つ (0)
提出
回答 (1)
セラミック仏香彫像仏教煙逆流コーンCenserバーナーホルダーホームインテリア
US$16.37 US$32.73

Q: I never received that item, can at least get my money back?

尋ねた m_ivanova13 に 2019-08-11 03:59:27

hawkt45 Yes,arrange that with Customer Service.

2022-05-14 02:42:10 役に立つ (0)
提出
回答 (1)
[EU/US Direct] SCULPFUN S9レーザー彫刻機 レーザー光線整形技術 高精度木材アクリルレーザー彫刻機 410x420mm 彫刻エリア フルメタル構造 クイックアセンブリーデザイン
US$369.99 US$499.99

Q: will it cut lite-ply and balsa wood?

尋ねた Chris Channon に 2022-04-28 03:30:12

hawkt45 Hello Chris Yes, this laser will easily cut balsa wood and plywood. I would suggest that you purchase an air assist nozzle, for the laser head. This can be 3D printed on any 3D printer and you will have to use an air supply of 35 Ltrs per min. Go online and you`ll see what i am refering to? I build RC planes, so this laser is perfect for wing ribs etc. You won`t be sorry, if you buy it.

2022-04-29 04:46:19 役に立つ (2)
提出
回答 (3)
hawkt45 18/04/2022
Very good product and highly recommended for RC Electric powered gliders. They are supplied with a propeller hub and mounting bracket. These have a 3.17 mm diameter shaft (1/8").
2 PCS Racerstar BR2826 1290KV 2-4S ブラシレスモーター RCモデル用
US$22.99 US$27.59
0
推奨事項
コメント (0)
hawkt45 18/04/2022
This is a very good diode type laser and bought it as a spare one. It comes with a mounting bracket and hardware. Keep your eyes protected, by using good quality goggles. Don`t just ignore this safety precaution.
SCULPFUNS9レーザー彫刻機用レーザーモジュールレーザーヘッドレーザー彫刻機レーザーカッターウッドアクリル切削工具
US$249.99 US$299.99
0
推奨事項
コメント (0)
hawkt45 18/04/2022
This clips onto the filter cartridge and increases the lifespan of the cartridge. Highly recommended to be used.
6800ガスマスクフルフェイスフェイスピースレスピレーターペイントスプレーコーティング用のフィルターアクセサリー
US$4.00 US$10.37
0
推奨事項
コメント (0)
hawkt45 18/04/2022
I have used this in my workshop and it works very well indeed. I can wear my glasses, with this full face mask. Very good quality and has the option for a single filter cartridge too.
産業監視を塗る6800全面的なガスマスクのFacepieceのマスク
US$27.53 US$37.73
0
推奨事項
コメント (0)
hawkt45 18/04/2022
Good cartridge filter and will protect your lungs, from paint fumes and dust particles etc.
3M 6200 6800 7502 ダブル ガスマスク用の6001CN フィルター コットンカバー
US$2.99 US$11.99
0
推奨事項
コメント (0)
hawkt45 18/04/2022
These filters will make the life span of the cartridge filters, last longer and can be replaced easily. Very good item and recommended to use them.
10個の5N11ガスマスクフィルターコットンフィルターカートリッジマスクレスピレーターの交換
US$9.99 US$18.99
0
推奨事項
コメント (0)
hawkt45 18/04/2022
These are very good milling cutters. keep the feed rate and plunge rates low, to prevent them from breaking.
Drillpro DB-M4 0.8mmの10個 Tungsten Steel ミリングカッタービット 3.175mmのシャンク エンドミル
US$10.99 US$13.99
0
推奨事項
コメント (0)

あなたは専門家です、あなたは助けることができますか？

招待メールを購読することを心から歓迎します！

購読すると、製品に関する質問に答えるために電子メールで招待されます。購読すると、「役立つバッジ」も獲得できます。プライバシー設定ページでいつでも登録を解除できます。

他の人を助け、幸せになりましょう！

  • 申し込む

バッジについて

バッジはコミュニティに関連しており、ユーザーは質の高いコンテンツを作成したり、ミッションを完了したり、特別なアクティビティに参加したりすることでバッジを獲得します。特定の人には独自の専用バッジもあります。
CEOバッジ

CEOバッジの所有者はバングッドのボス。

獲得できるバッジはまもなく提供されます
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe