すべてのメッセージ

Q: Where can I find 1 mm shaft props for this frame?

尋ねた marcello.scardi38 に 2020-10-16 01:57:10

eric.brasseur Type "48mm propeller" in the search field. Check carefully that you select propellers for 1 mm shaft, as 48mm propellers are also available for 1.5 mm shaft.

2020-10-16 03:50:45 役に立つ (0)
提出
回答 (1)

Q: will this fit Eachine e58? many thanks!

尋ねた BG243912354 に 2020-10-06 02:51:23

eric.brasseur No. The Eachine E58 is way too heavy to be lifted by those tiny motors. Besides the each motor must have the appropriate cogwheel. See https://www.banggood.com/Eachine-E58-RC-Quadcopter-Spare-Parts-0720-7mm-Brushed-Coreless-Motor-with-Gear-Connector-CW-or-CCW-p-1228777.html and take into account that a quadcopter uses two clockwise and two anticlockwise motors; you need to replace a clockwise with a clockwise and so on.

2020-10-07 03:03:03 役に立つ (0)
提出
回答 (5)

Q: Can the thermometer work when it is in the freezer?

尋ねた urimad に 2020-09-16 07:58:22

eric.brasseur To try and answer, yesterday I placed mine in the freezer. This morning it happily displayed -17.9 °C. According to its features list, it should work down to -50 °C. So it seems to be fine in a freezer, I just don't know what would happen on the long term.

2020-09-17 02:33:37 役に立つ (0)
提出
回答 (2)

Q: is there also the lens with 150mm cable?

尋ねた spruna に 2020-08-30 10:13:59

eric.brasseur Yes. But you may not get a 150mm cable. I got a much shorter cable.

2020-08-30 12:31:47 役に立つ (0)
提出
回答 (1)

eric.brasseur The connector is the same. But, the Volantex Sport cub 500 comes with a 360 mAh battery, while the battery you are asking bout is only 150 mAh. If it works, you will get half the flight time. It may not work at all and the plane may be unflyable. Maybe check in forums if that plane can fly correctly with a much lighter battery.

2020-08-07 08:49:33 役に立つ (0)
提出
回答 (1)

Q: What is the wire size

尋ねた Acb に 2020-07-28 10:55:05

eric.brasseur According to the photos, the wire to connect power and image is about 12 centimeters long. I cannot give an exact measure because I have already cut the wires of my camera. The wire for the OSD is about 15 centimeters long.

2020-07-29 06:19:05 役に立つ (0)
提出
回答 (1)

Q: Will it work with the JJRC H71?

尋ねた BG515251671 に 2020-07-18 04:24:17

eric.brasseur No. The Eachine H8 Mini weighs 20 grams while the JJRC H71 weighs 126 grams. The JJRC H71 requires stronger motors. Also the technology of the motors of the JJRC H71 may be different.

2020-07-19 02:06:00 役に立つ (0)
提出
回答 (1)

eric.brasseur Propeller diameter is about 44.5 millimeters. Probably exactly 1¾ inch. Shaft hole is 0.8 millimeters. About 1÷32 of an inch.

2020-07-14 05:55:48 役に立つ (1)
提出
回答 (1)

Q: Eachine E013 VR006 is compatible with Eachine TX801?

尋ねた BG564641991 に 2020-06-30 05:32:39

eric.brasseur Yes. Just beware that these goggles display in 4:3 image format hence the camera that you will connect to the Eachine TX801 transmitter needs also to use 4:3 format. If the camera provides a 16:9 image format, you will get an image inside the goggles but it will be horizontally squashed.

2020-07-01 02:54:27 役に立つ (0)
提出
回答 (1)

Q: what is the range of it

尋ねた BG183216432 に 2020-06-29 03:25:42

eric.brasseur If you solder this antenna on a typical 25 mW emitter on your drone and your receiver devices like goggles or DVR are good quality and have good antennas... and there is direct sight between the drone and the goggles or DVR... then the distance can reach 200 meters. If you fly among trees or buildings then the range will decrease, possibly a lot, like below 50 meters inside a forest.

2020-06-30 12:45:27 役に立つ (0)
提出
回答 (1)

Q: is I get battary with the prouduct

尋ねた BG221141717 に 2020-05-09 01:56:30

eric.brasseur No. It is meant to get its power from the battery of the drone. You can use any 1S battery provided that it has the correct power plug.

2020-06-17 05:14:13 役に立つ (0)
提出
回答 (2)

Q: Is it 4:3 or 16:9 ?

尋ねた eric.brasseur に 2020-05-24 09:17:53

Jaquen both

2020-06-02 09:28:23 役に立つ (0)
提出
回答 (1)