招待メールを購読することを心から歓迎します！
購読すると、製品に関する質問に答えるために電子メールで招待されます。購読すると、「役立つバッジ」も獲得できます。プライバシー設定ページでいつでも登録を解除できます。
他の人を助け、幸せになりましょう！
すべてのメッセージ
GRC71
04/03/2020
I bought these batteries to power my Diving Flashlight Nitesun DIV11.
This is not a Li-Po battery, but it's a Li-Ion.
Li-Ion battery has higher density, a lower cost has no "memory" effect , but it can suffer from ageing.
I've done a test using the Nitesun DIV11 flashlight and, after 1 hour and 30 minutes (in highlight mode), the brightness was pretty much the same.
I'll publish the video on my YouTube channel RC Lover san, soon.
SKYWOLFEYE 2個5800mAh 18650バッテリー懐中電灯パワーキャンプハンティングポータブルバッテリー
14,75€
18,44€
3
推奨事項
コメント (0)
GRC71
10/03/2020
GRC71
16/12/2020
GRC71
11/03/2021
GRC71
09/01/2021
GRC71
25/05/2020
GRC71
14/11/2020
GRC71
14/11/2020
GRC71
08/10/2020
GRC71
11/10/2020
Q: My switch randomly turns on and off. Is there a way to stop this?
尋ねた BG155642218 に 2020-08-16 12:08:52
GRC71 Theremay be some interferences (including magnetic fields), or bad connectors. How do you power it? Using the power supply, or batteries. If you are using the second option, be sure the batteries are fully charged otherwise the relay lock itself, once the voltage it's too low.
2020-10-08 11:41:23 役に立つ (0)回答 (1)
GRC71
08/10/2020
GRC71
08/10/2020
GRC71
15/01/2018
Q: cuál es la diferencia de 1,2 o 3 baterías?
尋ねた BG161644419 に 2020-07-11 12:59:26
GRC71 You can fly the quadcopter for longer, changing the battery as soon as it runs out.
2020-07-12 03:43:55 役に立つ (0)回答 (6)
GRC71
12/05/2020
GRC71
12/05/2020
Q: Can the double version work with 5V at 400mA? Not experienced with 2-6s meaning
尋ねた juliangliniecki に 2020-04-08 04:19:29
GRC71 According to the specs, it won't work with 5V, as the minimum voltage you have to provide for the double strobes version, it's 7.4V (2S). 3S 11.1V 4S 14.8V 5S 18.5V 6S 22.2V
2020-04-20 08:48:52 役に立つ (0)回答 (2)
Q: It is works in my car with 12 v battery?
尋ねた stamatis に 2017-12-15 03:16:59
GRC71 You can use 12V ONLY with the version that uses 2 strobe lights.
2020-04-20 06:09:17 役に立つ (0)回答 (4)
Q: How much volt is this?? 5v or 3.3v
尋ねた BG443717559 に 2020-04-17 08:37:28
GRC71 To power the Arduino Nano you can to plug it to the USB of your PC-Laptop (5V) using the serial cable. You still have though, the option of powering it using the 5V pin, using a voltage regulator (voltage has to be accurate). If you use the Vin port, you can use up to 12V to power it, but this is the last efficient way, as you dissipate through heat the excess of voltage. Regarding the output you have also the 3.3V pin. I hope it's helpful.
2020-04-20 06:05:01 役に立つ (0)回答 (5)