すべてのメッセージ

Costinmusca 09/06/2020
Pro's: - Nice compact triple emitter host for a 21700 fuel format - Decent wide all purpose beam pattern with little tint shifting in the hot-spot - Recessed button (although a bit too mushy for my liking) - Lanyard attachment ring (that can also be removed and rotates freely) - Anti-roll cutouts in the heat dissipation fins (not perfect, but better than none) Cons: - Rushed design - the screw-in bezel holding the lens and glass lens is not screwing all the way in (only around a full turn/360 degrees and that's it.. ) - No tool cutouts in the bezel as well, thus it can be hard to grip/unscrew it without messing the bezel itself and the body anodizing.. (the bezel protrusion is pointless in regards to gripping it as it's glossy and filed on the edge) - Not too easy to access the internals for modding (head & body are machined as one piece and the driver is screwed inside with two screws on the shelf inside the body - It wouldn't be very bad if one would only want to take the driver out, but fitting it back in and aligning the short emitter wires back into their place.. I'm not sure how that would be possible other than replace them with longer than the body ones and shorten them after the driver is screwed in) - The User Interface is cringeworthy, one of the worst I've ever encountered: From Off: - Click - Turn On (last state from Stepped memory) in Stepped Mode - Hold - Turn On (last state from Stepless memory) into Stepless Dimming Mode - 2 Clicks - Turbo - 3 Clicks - Strobe - 4 Clicks - Lock From On: (Stepless Mode) - Click - Turn Off - Hold - Ramp Up/Down - 2 Clicks - Turbo - 3 Clicks - Strobe From On: (Stepped Mode) - Click - Cycle: Low > Mid > High > Very High > Low > etc. - Hold - Turn Off - 2 Clicks - Turbo - 3 Clicks - Strobe From Turbo: - Click - Last state (memory or Off) - Hold - Turn Off From Strobe: - Click - Last state (memory or Off) - Hold - Turn Off
4
推奨事項
コメント (0)