すべてのメッセージ

temporalflux It says what it is for in the manual (which is linked in the listing). It is for HOVER SETTING - for calibrating a stable hover.

2020-10-15 08:57:07 役に立つ (0)
提出
回答 (3)

Q: When will the spare frame be available?

尋ねた Nico Grms に 2020-09-23 03:21:58

temporalflux That looks to be the Eachine Cinecan frame, which they seem to have discontinued, here: https://www.banggood.com/Eachine-Cinecan-85mm-4K-Cinewhoop-FPV-Racing-Drone-Frame-Kit-p-1546247.html?rmmds=myorder&cur_warehouse=CN Maybe they'll start stocking it again soon? However, if it is the same frame, I can tell you that is very tough, you are unlikely to break it.

2020-09-30 08:05:18 役に立つ (0)
提出
回答 (2)

temporalflux It is a 9x9mm mounting pattern. Motors with a 12x12mm mounting pattern won't fit, even if you only use 2 screws.

2020-09-24 08:59:14 役に立つ (0)
提出
回答 (2)

zotm_Bigdogge Bang Good has many such errors. They also list some plastic geared servos as metal gears, so be wary. One error is the replacement receiver brick for the Eachine Mini Mustang and Volantec Super & Sport Cubs. The page says it also works with the Eachine F-22 but that is wrong. Another error I am aware of is the Eachine Mini Corsair. The page says 3 channel but it's actually 4 channel.

2020-06-26 09:35:51 役に立つ (1)
提出
回答 (2)

Q: Can we change vtx channel/power etc via OSD (Smart Audio)?

尋ねた brdeleeuw に 2019-07-30 03:38:40

temporalflux I had this problem with Tramp not working and, I finally managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 10:21:04 役に立つ (0)
提出
回答 (9)

temporalflux I had this problem and managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 09:52:16 役に立つ (0)
提出
回答 (2)

temporalflux I had this problem and managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 09:51:57 役に立つ (0)
提出
回答 (2)

temporalflux I had this problem and managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 09:51:36 役に立つ (0)
提出
回答 (3)

temporalflux I had this problem and managed to fix it. In Betaflight BF4.1.5 or later (might still work on BF4.1.0 to BF4.1.4, I'm not sure), go the Video Transmitter tab. First, make sure that you have the IRC Tramp VTxTable set up (just do a search for 'Betaflight VTXtables' and the first result should take you to the Betaflight GitHub page for VTxTables). Then (and, this is what fixed it for me), turn on the slider that says 'Enter frequency directly' and, save. Not sure if this matters but, I had mine originally set, under that slider, to 5733 (BOSCAM_B 1) on 25mW. I can now change it via the OSD to any of the other supported channels and power levels.Hope this helps, it worked for me.

2020-07-11 09:51:08 役に立つ (0)
提出
回答 (3)

Hazzarino 1mm. Fit very tight. I had to break them to remove them again from the motors. Even one motor was damaged in the process as I had to use pliers. Also, not very well balanced. More vibrations than the cheap standard props.

2019-10-03 10:30:44 役に立つ (0)
提出
回答 (1)

Q: can i flash the recever with eu compatible firmware ?

尋ねた DimitriDe Puysseleyr に 2018-12-02 01:52:41

temporalflux Extremely doubtful, as the receiver is built into the flight control board. However, you should be able to add an external receiver - an XM, for instance.

2018-12-02 07:25:42 役に立つ (0)
提出
回答 (10)

Q: i need a DSMX version

尋ねた Vincent に 2018-11-02 10:29:58

temporalflux You can add an external DSMX receiver. Emax have never made a DSMX BNF (only FrSky) and, I doubt they will start now.

2018-11-03 07:33:35 役に立つ (0)
提出
回答 (5)

temporalflux You can add an external FlySky receiver. Emax have never made Flysky BNF (only FrSky) and, I doubt they will start now.

2018-11-03 07:32:04 役に立つ (0)
提出
回答 (4)