englundandy the fpv function of this camera is operated through wifi, it has very limited range. The wifi is mainly for changing camera settings and downloading recorded files. This camera is more often used for recording hd quality that the fpv cameras cannot usually deliver.

englundandy The eachine tyro 129 is designed for 6s voltage. Any 5s battery will be acceptable voltage. The 40amp esc is a 4 and 1 so the actual amperage that esc can handle is 40amps×4= 160amps continuous or 240amps burst. You wont ever burn this esc by using a 5s battery

englundandy If you have the eachine novice 3 these goggles will work with that kwad. These goggles will work with any 5.8ghz analog vtx(like you will find on most non digital kwads). Im not sure i understood your question though.

englundandy I used an frsky r9 rx, non-inverted and had the sbus pads bridged and it worked great.

englundandy The wifi has about a 25 meter capability. Much further than that an you will start experiencing wifi dropouts and disconnected messages. Its best to have the phone and camera right next to eachother for setting changes and downloading files.

englundandy No definitely not. This case is designed for the lower profile binocular style of goggles. Box goggles will need a much larger case. Perhaps a small soft sided cooler, the size designed to chill a six pack.

englundandy Yes it comes disarmed, it will only arm with the switches set up to arm. Verify correct switch operation before plugging in battery. This drone is not a toy, the props will cut off fingers if your not careful.

englundandy Usually people don't put a dji air unit in such a budget kwad. There would be room however, mount it on above the top plate and the GPS mounted on an arm, or a 3d printed mount on the rear. Part of this hobby is making things work, things that wouldn't normally work together.