Banggoodでのスピンドルモーターのトップポジティブレビュー Japan|購入日本

19% OFF マキフィット ER11チャックCNC 500Wスピンドルモーター、52mmクランプおよび電源スピードガバナー US$80.99 US$99.99 View It

全体：

19josh98creator 26/12/2020

Bought this to cut aluminium on my 3018 pro. I have a couple of issues to start with: the motor wires need to be lengthened for this to adequately move on the machine. simple enough to do with a couple of barrel connectors, but just be aware. The second is the fan on the top of the motor. its verticle fins only really disrupt the air and do not keep the motor cool enough. i have designed and printed a propper cooling fan which keeps the motor temp down, as it can get quite hot. the final thing to moan about is the power box. there is no safety switch, once plugged in the system is live so make sure the speed control is at zero or the motor is no where near anything. its easy enough to add one, and you can even use a relay to switch it on and off from the original board. so onto the good bits. the motor is easy enough to setup, the aluminium block i recommend you use, as it acts as a heat sink for the motor. you will have to print a new carriage for it though. for the 3018 pro machine, the motor doesnt put too much strain on the x axis, but for greater depths and speed, i recommend adding an additional rail to reduce flex. the motor is actually quieter than the original motor, and will allow you to mill aluminium, and it may do steel at a really low feedrate. i am still experimenting with speeds and feeds, but all in all a really good kit to upgrade the basic 3018 bench mills!

コメント (7)

提出

Roger Would you share the file for the newly designed fan?
返信 12/03/2021

提出
AresFPV i keep trying too
返信 28/04/2021

提出
AresFPV its on thingiverse. i can share the number or link BG wont let me
返信 28/04/2021

提出
John E. Pasichnyk @AresFPV Canyou please type in the Thingverse number so we can see the file?
Thank you.
返信 11/05/2021

提出
AresFPV thing:4803721
返信 25/06/2021

提出
BG381550371 Butthis is not the origin X-Axis support? Where you buy it?
返信 26/11/2021

提出
AresFPV @BG381550371 the xaxis carriage is stock but the vertical z axis i designed
返信 19/12/2021

提出

会社概要	お問い合わせ	お支払い&配送情報	パートナーシッププログラム
Banggood.comについて保証と返品ポリシー規約と条件プライバシーポリシービジネス・法人売買サイトマップ特定商取引法に基づく表記	お問い合わせ初心者ガイドヘルプセンター専門業務	支払い方法配送について配送先送達予定時間 BGpayに関して	ファッションブロガー・プログラムアフィリエイトプログラム卸売りプログラムドロップシッピングレビュークラブ

会社概要

お問い合わせ

お支払い&配送情報

パートナーシッププログラム