Banggoodでの飛行コントローラーのトップポジティブレビュー Japan|購入日本

18% OFF F3_EVO_BRUSHED 1S 3.7Vフライトコントローラー29mm Eachine Turbine QX70 DIYマイクロFPVレーサードローン用Frsky/Flysky受信機内蔵 US$22.99 US$27.99 View It

全体：

czarobest 11/01/2021

I received the controller today. It looks good, but I haven't tested with the engines yet. However, I soldered the USB cable to the test and I flashed the firmware to newest version without problems. Looking from the front of the socket the wires should be [GND(black)] [Data +(green)] [Data-(white)] [+5V(red)] as in the picture I added. It has easily connected to Taranis X9D+ and reads all channels and position from gyroscope correctly. Additionally I soldered the capacitor on battery input.

コメント (16)

提出

Asaus Asrock Hello!I want to ask how much capacitor you put on the input?
返信 09/02/2021

提出
Asaus Asrock Hello!
I want to ask how much capacitor you put on the input
返信 09/02/2021

提出
czarobest @Asaus Asrock Iused a 1000uF 6.3V electrolytic capacitor and little 22uF SMD tantalum capacitor but ceramic (MLCC) would be better :).
返信 11/02/2021

提出
czarobest @Asaus Asrock PS:This electrolytic capacitor is the low ESR type.
返信 12/02/2021

提出
Tnt2k03 why a capacitor needed, is it for filtering purposes?
返信 17/03/2021

提出
czarobest @Tnt2k03 Yes,for filtering. You don't have to do that, but I just prefer to always add condensers. Especially since I also have an FPV system hooked up here with a camera and transmitter to the same battery. So it reduces interference on the video.
返信 19/03/2021

提出
czarobest Capacitors*not condensers :P
返信 19/03/2021

提出
andrea21041988 hi, like you I connected the usb cable to the FC, the computer recognizes that it is on com3 and also on cleanflight it is com3. when I connect it says that the FC has an old version of the firmware and therefore I can only use the CLI mode, when instead I try to update the firmware it says no response from the bootloader programming failed
返信 03/04/2021

提出
BG482035541 Hi,
Glad to know that it worked for you. Can you please advise which Firmware you used?
返信 03/04/2021

提出
BG482035541 Andplease do let know what is the sequence to binding the F3 with Flysky, mine doesn't seems to be binding or may be not arming, Would really appreciate if you can also share the Arming combination on the remote/transmitter.
返信 03/04/2021

提出
BG382118104 The binding to Flysky doesn'n works fo me eighter. I start rec in binding mode and start the binding process on my Flysky remote. I tryed in reverse order too without success.
返信 15/04/2021

提出
juantorres0123 Como hago para enviar a Puerto Rico?
返信 24/04/2021

提出
BG531864124 what is the connector for the motors? and USB called?
返信 03/06/2021

提出
czarobest @BG382118104 @BG382118104Unfortunately, I have a FrSky radio and it works fine with no problems. I don't know how to connect to Flysky. I used CLFL_v2.5.0 SPRACINGF3EVO firmware for this.
Try this instruction - http://myosuploads3.banggood.com/products/20200813/20200813051234EachineTurbineQX70Quickguide.pdf
返信 18/06/2021

提出
czarobest @andrea21041988 Maybetry this manual: http://myosuploads3.banggood.com/products/20200813/20200813051234EachineTurbineQX70Quickguide.pdf
And try to flash the board with CLFL_v2.5.0 firmware (Board - SPRACINGF3EVO).
返信 18/06/2021

提出
BG163431148 thanks
返信 06/07/2021

提出

会社概要	お問い合わせ	お支払い&配送情報	パートナーシッププログラム
Banggood.comについて保証と返品ポリシー規約と条件プライバシーポリシービジネス・法人売買サイトマップ特定商取引法に基づく表記	お問い合わせ初心者ガイドヘルプセンター専門業務	支払い方法配送について配送先送達予定時間 BGpayに関して	ファッションブロガー・プログラムアフィリエイトプログラム卸売りプログラムドロップシッピングレビュークラブ

会社概要

お問い合わせ

お支払い&配送情報

パートナーシッププログラム