すべてのメッセージ

Q: Do i use Elevon or V tail mixing on this or no mixing?

尋ねた KiwiChristian に 2018-02-20 11:55:59

john4565 It depends which control head mode you choose to build; the mode shown in the first large image at the top of this page (the control arms at right angles) will not require any mix, whereas the mode shown in the second large image (control arms straight) will require an elevon mix. At the end of the day you want right aileron to make the right side of the rotors drop and down elevator will make the front of the rotors drop.

2018-06-04 07:25:51 役に立つ (1)
提出
回答 (2)

Q: Where is the CG located?

尋ねた KiwiChristian に 2018-02-20 11:55:00

john4565 Hold the Luobo by the rotor head and the nose should be pointing slightly down (about a 15° down angle from horizontal).

2018-06-04 07:03:19 役に立つ (0)
提出
回答 (2)

john4565 I used a Racerstar BR2208 1400KV with an 8x4 propeller. My testing shows a current draw of 11amps at wide open throttle on a 3S LiPo. It performs very well in the Luobo.

2018-06-04 06:59:58 役に立つ (1)
提出
回答 (1)