すべてのメッセージ

Q: can you use tamiya nimhs? (7.4v)

尋ねた Ben_jsy に 2022-09-25 01:10:53

Gugman Yes. Any NiMH battery will work with it. You will have to either change the battery connector for it or get an adapter plug to suit your battery connector.

2022-09-25 08:08:51 役に立つ (0)
提出
回答 (1)

Q: Is it fully proportional

尋ねた BG503250914 に 2022-09-03 11:41:46

Gugman Yes it has fully proportional steering and acceleration.

2022-09-03 09:44:45 役に立つ (0)
提出
回答 (1)

Q: What is the useful life of the laser?

尋ねた BG153272191 に 2020-06-16 12:10:46

Gugman Ihave looked for information about it and can not find anything for this.

2022-08-30 05:11:20 役に立つ (0)
提出
回答 (2)

Gugman@timm.hansson I have not seen any for sale yet. I have now just got another original motor mount and the 27T pinion and used a 3600kv and a 3900kv 3650 motor in them instead. There are also ESC\'s that look exactly the same as the 45A ESC that come in a 60A, 80A or 120A and half the price of the 45A one. Now the cars do 73 to 77kmh on a 2S battery and 85 to 89kmh with a 3S battery which almost blows the tyres off the rims. Another thing I did is get a DumboRC 6CH transmitter and the X6F or X6FG receivers with the X6FG having a Gyro if needed and then you will have a 400 meter range and no cogging issues.

Gugman 06/07/2022
0
コメント (2)

Q: hai is it have the isi mark?

尋ねた ranjith に 2017-12-28 11:16:53

Gugman Thisis only a replica helmet and sounds like it is more of a prop for cosplay or movie. I would not trust it to save you in an accident on a motorcycle.

2022-08-30 05:00:25 役に立つ (0)
提出
回答 (2)

Q: Have a manual ? Work whith spektrum tx ?

尋ねた Drago に 2021-11-14 11:15:10

Gugman No.You would need to get a Spektrum TX compatible receiver instead for it to work with your transmitter. Every brand of transmitter will only work with the same branded receiver.

2022-08-30 04:51:08 役に立つ (0)
提出
回答 (2)

Gugman Toprogram the ESC you need a programming card for it. It is usually the SURPASS HOBBY LED Programming Card that works for it. Otherwise it might be the Program Card for HobbyFans, OCDAY, GOOL Brushless ESC one that is needed and it has a lot more programming options.

2022-08-27 02:44:15 役に立つ (1)
提出
回答 (2)

Q: does differential wobble in this metal case for 124017 ???

尋ねた BG181934223 に 2022-08-27 01:50:36

Gugman No. I have had no issues with them in any of my cars. If it does wobble it must mean the bearings are worn out and need replacing.

2022-08-27 02:30:03 役に立つ (0)
提出
回答 (1)

Gugman The center diameter of the pinion is 3.175mm and will fit all motors with that size shaft. Removing the pinion and mount from the original motor is not easy and the screws can and will strip very easily. Best to buy a new pinion and motor mount for it too as it is far easier to do that than struggle with whatever loctite WLtoys uses on them.

2022-08-03 10:18:26 役に立つ (0)
提出
回答 (1)

Q: I want to run a 4S in the V2, I just need to upgrade to a 80A ESC?

尋ねた BG531163812 に 2022-07-25 09:11:31

Gugman Yesas there are ESC,s exactly the same size as the current ESC that you can get that are 80A and even 120A that can handle using a 4S lipo. I got an original motor mount and the 27T pinion and use a 3650 3900kv motor. Using a 2S battery the car does around 74kmh and 3S it goes 89kmh. With a 4S battery you would need to use a 3100kv motor.

2022-07-28 02:26:19 役に立つ (0)
提出
回答 (2)

Q: il motore è compreso di pignone e supporto motore?

尋ねた Fabio tiberi に 2022-04-21 04:56:40

Gugman Yesthe motor comes in the mount with the pinion on it already. The only problem is that the reduction gear needs to be the V2 one as the original 44T reduction gear is slightly to big for it to work properly as fitting this motor and mount with the 19T pinion is so tight fitting that it can not turn at all. Best to get a 3650 3900kv motor and the original motor mount with the 27T pinion and that will make the car do over 70kmh.

2022-07-28 02:11:09 役に立つ (1)
提出
回答 (2)

Q: What is the diameter of the pinion?

尋ねた JPGR に 2022-04-30 01:02:17

Gugman Ifyou look below in the description you can find it and it shows the following... 19T Pinion Gear Spec: Item Number:2178 Item Name:Motor gear 19T 0.7M Material:Stainless steel Color:Grey Product Size:0.7*19*9.8*3.2mm Product Weight:Approx.6.4g

2022-07-28 02:05:03 役に立つ (0)
提出
回答 (2)

Q: 45amp?isn't the esc supposed to be 60 amp?

尋ねた Conkers83 に 2022-04-17 04:03:06

Gugman Yesit is. I do not know why this is only 45A. But there are ESC's that are exactly the same size as this one you can get that are a 60A, 80A or 120A that can use 2S-4S for less than half the price of this 45A one. I used an 60A ESC with a 3650 3900kv motor with the 27T pinion that makes the car do 74kmh on 2S and 89kmh on 3S.

2022-07-27 05:41:10 役に立つ (0)
提出
回答 (2)

Q: Col motore è incluso il supporto?

尋ねた Kyno81 に 2022-04-04 01:36:46

Gugman Theyare all sold separately. The pinion is not needed as the motor already comes in the motor mount and has the pinion already on it.

2022-07-25 04:56:45 役に立つ (0)
提出
回答 (2)

Gugman Yesit would work. But to use the motor with the 19T pinion the center reduction gear in the cars is to big and needs to be the newer V2 reduction gear that is not available to buy separately yet. I tried fitting the motor and it is so close and tight fitting that it can not even turn with the 44T reduction gear. Best to get a new motor mount and 27T pinion gear and use a 3650 3600kv or 3900kv motor instead. Works great and does over 70kmh on 2S.

2022-07-25 03:41:41 役に立つ (0)
提出
回答 (3)

Q: what is the cell capacity this set up can handle 2-4s?

尋ねた BG531163812 に 2022-07-25 02:41:28

Gugman It is only a 45A ESC that can use 2S-3S. The motor already comes with the mount and pinion on it. But to use the motor with the 19T pinion the center reduction gear in the cars is to big and needs to be the newer V2 reduction gear that is not available to buy separately yet. I tried fitting the motor and it is so close and tight fitting that it can not even turn with the 44T reduction gear.

2022-07-25 03:33:51 役に立つ (0)
提出
回答 (2)

Gugman Yesit comes with the motor mount and pinion gear already on it. But it will only work on the V2 124016 and 124017 and not the original 124016, 124017, 124018 or 124019. The V2 pinion is only 19T and the reduction gear 38T as the originals are 27T and 44T. Also trying to remove the pinion gear or motor from the mount is almost impossible due to the loctite WLtoys uses and stripping the screw heads is very easy to do.

2022-07-14 05:25:35 役に立つ (0)
提出
回答 (2)

Q: hi is the esc waterproof?

尋ねた BG462210165 に 2022-05-21 02:38:23

Gugman Itis only water resistant and do not submerge it underwater or it will die.

2022-07-14 05:18:22 役に立つ (0)
提出
回答 (3)

Q: hi is the esc waterproof?

尋ねた erkan58 に 2022-05-21 02:51:39

Gugman Onlywater resistant. So do not submerge it in water or it will die.

2022-07-14 05:17:20 役に立つ (0)
提出
回答 (3)