すべてのメッセージ

Q: will it work with the ES24TX Pro 2.4GHz Transmitter

尋ねた Jim McKeown に 2022-11-24 01:20:45

Montis Yes, it will work with any 2.4GHz ELRS transmitter. You will need at least ELRS version 3.0 for EP1 Dual to work.

2022-11-24 03:10:35 役に立つ (1)
提出
回答 (1)

Q: can I use this in a quadcopter

尋ねた JustinAlley072706 に 2022-04-07 09:09:13

Montis You can use it in quadcopter. In fact, you can even use it in tricopter. Also works in hexacopter. 8 PWM outputs means you can control up to 8 motors.

2022-05-11 02:03:05 役に立つ (1)
提出
回答 (3)

Q: Does the VTX has SmartAudio feature?

尋ねた Montis に 2019-11-26 06:01:54

etwitty81 Yes it DOES! I had to research myself how to properly make the smart audio work. I will reserve my finding to myself. Though I will say this, out of the box smart audio and the RX DO share the same UART until the user do add a connection to the FC and vtx.

2022-05-06 12:43:20 役に立つ (0)
提出
回答 (2)

Q: Wear the 1935 propellers?

尋ねた recursosrurales に 2019-09-19 07:52:31

Montis 3inch propellers are recommended. 1.9 inch props will have very low performance.

2022-03-22 05:05:29 役に立つ (0)
提出
回答 (1)

Q: is this ELRS?

尋ねた chittybangbang に 2022-02-08 04:43:04

Montis It is ExpressLRS receiver. However one of the photos shows XM receiver, so yeah, confusing.

2022-02-14 05:26:13 役に立つ (1)
提出
回答 (4)

Q: What does RX input is for?

尋ねた Montis に 2017-11-14 12:18:37

BG351738321 It can not be used. RX pin can control the frequency by remote control. Thank you for the question, and I look forward to hearing about your future successes.

2022-02-08 12:57:07 役に立つ (0)
提出
回答 (2)

Q: What is the difference between this one ( 915MHz) and the 868MHz one?

尋ねた ItsRagnarok に 2022-02-07 05:27:25

Montis Antenna is tuned to the different frequency. In the EU 915MHz band is used for GSM towers, so you need to get the 868MHz one.

2022-02-08 12:07:36 役に立つ (1)
提出
回答 (2)

Montis No,it is not available to purchase separately, but you could search for "jst-gh 6pin plug" or "jst-gh 6pin pigtail" on the internet.

2022-02-07 04:26:26 役に立つ (0)
提出
回答 (1)

Q: Can I buy the cable on it's own? I broke mine...

尋ねた bug5532 に 2018-11-25 02:37:04

Montis Yes,it is available as separate item. Look here: Caddx CB01 Camera Wire Coaxial Cable 8cm for Caddx Turtle V2 DJIR~qb1BA2B12!BA~^^

2022-02-07 04:22:12 役に立つ (0)
提出
回答 (1)

Q: Does this have wifi

尋ねた BG175635381 に 2021-12-21 12:30:48

Montis Yes, Matek ELRS receivers can be flashed by wifi.

2021-12-21 03:13:47 役に立つ (1)
提出
回答 (1)

Montis You should specify what type of the aircraft you are going to use. Presumably you are asking for quad/whoop type aircraft, then you could use the 4in1 or AIO board with up to 5A ESC's. For a small plane you could use any ESC with 5A 1S rating. (like this one: Flashhobby Super Mini 7A BLheli_S 1-2S Brushless ESC 0.83g Support DShot600 for RC Drone FPV Racing - https://www.banggood.com/custlink/DGGyAyLnMJ).

2021-12-03 04:23:48 役に立つ (3)
提出
回答 (2)

Q: will this work with E-lrs?

尋ねた Bigmasri に 2021-10-25 08:44:52

Montis Yes, it is primarily designed for ELRS receivers. you need to add ELRS receiver to it. Should also work with TBS Crossfire Nano receiver

2021-10-25 09:02:23 役に立つ (1)
提出
回答 (1)