できればこの小さな箱に6つ星をあげよう! 優れた品質、よく製造され、仕上げに欠陥がなく、耐候性があり、私の国で簡単にこれを見つけることはありませんので、ありがとう! これは私のNodeMCUパーソナル気象ステーションを保護するために行きます。

I would give 6 stars to this little box if I could! EXCELLENT quality, well manufactured, no flaws in finishing, weather resistant and I would never find this in my country easily, so thank you! This one goes to protect my NodeMCU personal weather station.

できればこの小さな箱に6つ星をあげよう! 優れた品質、よく製造され、仕上げに欠陥がなく、耐候性があり、私の国で簡単にこれを見つけることはありませんので、ありがとう! これは私のNodeMCUパーソナル気象ステーションを保護するために行きます。

良質のソリッドボックス。 ゴムを蓋に取り付けます。 長さは大丈夫ですが、少し短い場合は少しだけ引き出して、非常にわずかな張力でリフィットします。 グランドは直径2.5~6mmのケーブルに適合します。

Good quality solid boxes. Need a bit of care fitting the rubber to the lid: Length is ok if fitted properly, but if you find it a bit short just pull out and refit with very slight tension. The glands fit cables 2.5 to 6 mm diameter.

良質のソリッドボックス。 ゴムを蓋に取り付けます。 長さは大丈夫ですが、少し短い場合は少しだけ引き出して、非常にわずかな張力でリフィットします。 グランドは直径2.5~6mmのケーブルに適合します。

Very nice box and well waterproof. It does hold the Sonoff basic with the housing although it could have been a bit larger. Especially if you use thick wires like I did. Nonetheless it suits the purpose and I could mount the switch in my garden!

Very nice box and well waterproof. It does hold the Sonoff basic with the housing although it could have been a bit larger. Especially if you use thick wires like I did. Nonetheless it suits the purpose and I could mount the switch in my garden!

Very nice box and well waterproof. It does hold the Sonoff basic with the housing although it could have been a bit larger. Especially if you use thick wires like I did. Nonetheless it suits the purpose and I could mount the switch in my garden!

I use it for my modules in damp rooms and it works great. it is too small for the Sonoff TH10 and TH16 modules but perfect for the DIY modules

I use it for my modules in damp rooms and it works great. it is too small for the Sonoff TH10 and TH16 modules but perfect for the DIY modules

I use it for my modules in damp rooms and it works great. it is too small for the Sonoff TH10 and TH16 modules but perfect for the DIY modules

子供たちに再生可能エネルギーについて教えるのに使うために買った。 風と雨の中で1ヶ月以上屋外で2回も、問題なく過ごしました。 他のプロジェクトにまた買います。

Bought to use as part of teaching my children about renewable energy. I've had 2 outside in the wind and rain for over a month without any problems. I will buy again for other projects.

子供たちに再生可能エネルギーについて教えるのに使うために買った。 風と雨の中で1ヶ月以上屋外で2回も、問題なく過ごしました。 他のプロジェクトにまた買います。

Excellent... 👍

Excellent... 👍

Excellent... 👍

i prodotti sonoff sono i migliori.

i prodotti sonoff sono i migliori.

i prodotti sonoff sono i migliori.

Nice box but did not expected that it is so small. For comparison I have a sonoff power module. I needed to remove it from case to fit it inside.

Nice box but did not expected that it is so small. For comparison I have a sonoff power module. I needed to remove it from case to fit it inside.

Nice box but did not expected that it is so small. For comparison I have a sonoff power module. I needed to remove it from case to fit it inside.

The overall quality is pretty good actually and I loved the addition of the silicone filler. The big problem is that it's extremely difficult to mount a POW/Dual/TH series board in this case as there is no room at the end for the incoming wires. I think the design could be improved by either lengthening the box to accommodate the wires or alternatively, locate the holes for the glands at the other end. I'm going to patch the pre-made existing holes and make new ones on the other end or even on one side.

The overall quality is pretty good actually and I loved the addition of the silicone filler. The big problem is that it's extremely difficult to mount a POW/Dual/TH series board in this case as there is no room at the end for the incoming wires. I think the design could be improved by either lengthening the box to accommodate the wires or alternatively, locate the holes for the glands at the other end. I'm going to patch the pre-made existing holes and make new ones on the other end or even on one side.

The overall quality is pretty good actually and I loved the addition of the silicone filler. The big problem is that it's extremely difficult to mount a POW/Dual/TH series board in this case as there is no room at the end for the incoming wires. I think the design could be improved by either lengthening the box to accommodate the wires or alternatively, locate the holes for the glands at the other end. I'm going to patch the pre-made existing holes and make new ones on the other end or even on one side.

If you use a 16A capable cable then the outer insulation won't fit inside the sealing tube. However you can always strip the outside insulation, this way the live, neutral and earth cables will tightly gripped by the box.

If you use a 16A capable cable then the outer insulation won't fit inside the sealing tube. However you can always strip the outside insulation, this way the live, neutral and earth cables will tightly gripped by the box.

If you use a 16A capable cable then the outer insulation won't fit inside the sealing tube. However you can always strip the outside insulation, this way the live, neutral and earth cables will tightly gripped by the box.