Product size: 215 x 115 x 50mm
|
アイテム |
Technical Specifications |
|
出力 |
直流電圧 |
12V |
24V |
36V |
48V |
60V |
|
定格電流 |
33.3A |
16.6A |
11.1A |
8.3A |
6.6A |
|
定格出力 |
399.6W |
398.4W |
399.6W |
398.4W |
396W |
|
Ripple and noise ① |
<150mV |
<150mV |
<240mV |
<240mV |
<240mV |
|
Voltage accuracy |
±1％ |
|
出力 voltage adjustment range |
±10％ |
|
Load Regulation |
<±1.2％ |
<±1％ |
<±0.5％ |
<±0.5％ |
<±0.5％ |
|
Linear adjustment rate |
<±1％ |
|
入力 |
Voltage range |
90-132VAC/180-264VAC 47Hz~63Hz; 254VDC~370VDC |
|
Efficiency (typical) ② |
> 82％ |
> 84％ |
> 86％ |
> 86％ |
> 86％ |
|
作業電流 |
<5.2A 115VAC, <2.8A 230VAC |
|
電気ショック |
110VAC: 25A, 220VAC: 50A |
|
Start, rise, hold time |
200ms, 50ms, 20ms: 230VAC |
|
Protection |
過負荷保護 |
105%-135% type: constant current output, +V0 falls to undervoltage point to cut off output, reset: power on again |
|
Overvoltage protection |
Turn off output when >=115%-145% |
|
Undervoltage protection |
Turn off output when <10%-45% |
|
短絡保護 |
Close output |
|
|
Over temperature protection |
RTH3:>=65°C fan starts, <=55°C fan off, >=80°C off output (5V-15V)
RTH3:>=70°C fan starts, <=60°C fan off, >=85°C off output (18V-48V) |
|
Environment |
Working temperature, humidity |
-10°C ~+50°C, 20% ~90%RH |
|
Storage temperature, humidity |
-20°C ~+85°C, 10%~95%RH |
|
安全性 |
Withstand voltage |
入力-出力: 1.5KVAC
入力 - Enclosure: 1.5KVAC
出力 - Enclosure: 0.5KVAC for 1 minute |
|
漏れ電流 |
入力-output <6mA at 1.5KVAC |
|
漏れ電流 |
入力-output <1.5mA at 220VAC |
|
絶縁抵抗 |
入力-output, input-housing, output-housing: 500VDC/100MΩ |
|
他の |
サイズ |
215*115*50mm |
|
Net reset / gross reset |
874.1/936.3g |
①Ripple and noise measurement method: Use a 12mm twisted pair cable, and the terminal should be connected with 0.1uF and 47uF capacitors in parallel and measure at 20MHz bandwidth.
②Efficiency is tested at an input voltage of 230VAC, rated load, and ambient temperature of 25°C.
Accuracy: Includes setting error, linear adjustment rate and load adjustment rate.
Linear Rate Test Method: Test from low voltage to high voltage at rated load.
Load regulation test method: from 0% to 100% of rated load.
The startup time is measured in the cold start state. The fast and frequent switching machine may increase the startup time. When the operating altitude is higher than 2000M, the operating environment temperature should be reduced by 5°C/1000M.
パッケージ内容:
1×電源
