お客様レビュー

レビューを書きます。
  • すべてのレビュー (124)
  • 画像 (26)
  • ビデオ (0)
  • オールスター
    • オールスター(124)
    • 5スター(119)
    • 4スター(3)
    • 3スター(2)
    • 2スター(0)
    • 1スター(0)
並び替え:
トップレビュー
  • トップレビュー
  • 最も役立つ
  • 新着商品
あなたの国からのレビューのみ(Japan)
|
オリジナルを表示

レビューの一部は自動翻訳されています。

  • 05/06/2018

    The electronic thermostat is just perfect for my DIY projects. Finally built an incubator. :-)

    コメント
    オリジナルを表示
  • 19/04/2017

    Tökéletesen meg felelt a leírásnak!

    コメント
    オリジナルを表示
  • 10/10/2020

    早く来た! テスト不足は、アセンブリにすべて含まれています。 ありがとう バンコク!!!

    コメント
    オリジナルを表示
  • 21/09/2018

    bom custo beneficio e até chegou rapido

    コメント
    オリジナルを表示
  • 10/03/2018

    The housing does not fit together easily. In order to save slightly longer screws, the bottom plate is too close to the PCB, so that the protruding wires of the parts ensure that the bottom plate is bent. An annoying fact is that it has not been thought that you have to screw the module. If the bottom plate had been made two centimeters wider and had two extra holes, this problem was solved. Of course we were curious how the accuracy of such an extremely cheap device looks like. We compared the reading of the NTC sensor with that of a type-K thermocouple coupled with a precise Lascar thermometer. The average error is ± 1.43 ° C and that is good enough for a thermostat. At around room temperature (+20 ° C) the error was the smallest but the deviation increases, both to lower and higher temperatures. At a reference temperature of -5 ° C the W1209 indicated a temperature of -7.2 ° C. At a reference temperature of +100 ° C the module claimed that it was +102 ° C. Read the full test: http://verstraten-elektronica.blogspot.nl/p/w1209-temperatuur-controller.html

    コメント
    オリジナルを表示
  • 04/07/2017

    I purchased this kit with no real use in mind. Bottom line is, I am retired and simply put kits together to keep the 'little grey cells' active. But having said that this is a great kit to build. It comes with a sensor probe on a twin flex that is about 500mm long. The temperature settings are displayed on a display of 3 x 7 segment LED's. Input requirement is 12 volts and this is switched by a onboard relay rated at 20A @ 14 volts. Temperature settings and adjustments are set/made using 3 PCB switches. And the bonus - the whole assembly is housed in a clear Perspex case measuring a very tiny 58 x 50 x 15 mm. Uses are limited only by your imagination.

    コメント
    オリジナルを表示
  • 05/05/2021

    この小さなテンポリレーはとてもうまく機能します。 あなたの製品に正直に満足しています。 バングッドさん、ありがとう。

    コメント
    オリジナルを表示
  • 06/04/2021

    インバーターや、設計した追加のファンシステムで、インバーターのオリジナルファンを常にオフに保ちます。 このテストの後、もっと注文した素晴らしい商品 😀

    コメント
    オリジナルを表示
  • 16/06/2019

    المنتج وصل في وقت جصير وليس تالف

    コメント
    オリジナルを表示
  • 14/06/2019

    Good Banggood.

    コメント
    オリジナルを表示
Show:

    合計 0 ページ

    ページに移動

    あなたにおすすめの商品

    recommendation for you
    • US$8.99
    • US$4.99
    • US$3.99
    • US$7.49
    • US$5.99
    • US$8.40
    • US$27.59
    • US$5.99
    • US$6.99
    • US$17.99
    • US$4.99
    • US$5.99
    • US$15.99
    • US$38.99
    • US$39.99
    • US$5.99
    • US$10.99
    • US$12.99