お客様レビュー

4.94 から 5
レビューを書きます。
  • すべてのレビュー (17)
  • 画像 (1)
  • ビデオ (1)
  • オールスター
    • オールスター(17)
    • 5スター(16)
    • 4スター(1)
    • 3スター(0)
    • 2スター(0)
    • 1スター(0)
並び替え:
トップレビュー
  • トップレビュー
  • 最も役立つ
  • 新着商品
  • March-24 2019 16:15:56

    Flown this a couple of times and so far it feels good. I'm unsure if one of the motors does not look as healthy as the other 3 but that is the only thing I have seen. Footage of my flight is here https://youtu.be/MNNiWmoH3kI

    コメント (1)
  • July-09 2020 02:08:22

    Отличный коптер! Был приятно удивлен обнаружив в посылке направленый патч GEPRC. СПАСИБО!

    コメント
  • July-12 2020 06:35:29

    semplicemente stupendo

    コメント (1)
  • December-17 2019 18:37:26

    Got about 20 flights out of it before the esc died. Expected a bit better than that.

    コメント
  • August-25 2020 11:15:46

    Top

    コメント
  • December-05 2019 11:18:09

    excellent service very quick delivery

    コメント
  • October-20 2019 16:45:06

    So well, the drone is very well constructed and assembled. Nonetheless you have to make some changes with the R9mm to make it working properly. Have to unsolder the signal cable from the plug pin and resold it on the T6 UART pad over the flight controller in order to get the telemetry correctly. It's kinda embarassing that GEPRC doesn't know how to put the R9mm on their drone. So if you buy it with r9m be ready to make some solder. For the rest it looks pretty good.

    コメント (1)
  • April-10 2019 12:10:41

    The quad is good for the price. Well assembled, well cabled, very nice. What’s wrong in my opinion: - the R9MM receiver was flashed with an old release of FLEX firmware. So I had to solder wires to update firmware. - the R9M modules was not previously binded with receiver, and it not had FLEX firmware, so I must had to flash it with FLEX firmware too - the FPORT inverted signal from receiver was connected to SBUS input, instead it should be connected with uart TX. So no way to get telemetry

    コメント (2)
  • March-04 2019 18:51:33

    I'm absolutely delighted with the amazing Crocodile 7 (with R9mini and Runcam Split 2s) - GEPRC have done it again - quality, quality gear! The frame is chamfered in all the right places, the 3d printed parts have been carefully thought out and prevent your precious antenna and camera from damage. The R9 mini was setup using Fport, but I had to flash with EU LBT firmware, so some careful soldering was needed. The Betaflight settings are good and mostly ready for flying, although I spent a long time

    コメント (2)
  • July-19 2019 16:12:03

    Drone excepcional, vai dar muitas alegrias.

    コメント (1)
Show:

    Go to page

    Go

    あなたにおすすめの商品

    recommendation for you
    • 31,710円
    • 521円
    • 33,724円
    • 7,834円
    • 325円
    • 2,014円
    • 4,559円
    • 20,361円
    • 1,114円
    • 492円
    • 8,695円
    • 17,038円
    • 8,017円
    • 15,802円
    • 22,270円
    • 9,121円
    • 9,438円
    • 14,742円