お客様レビュー

4.84 から 5
レビューを書きます。
  • すべてのレビュー (51)
  • 画像 (3)
  • ビデオ (0)
  • オールスター
    • オールスター(51)
    • 5スター(46)
    • 4スター(2)
    • 3スター(3)
    • 2スター(0)
    • 1スター(0)
並び替え:
トップレビュー
  • トップレビュー
  • 最も役立つ
  • 新着商品
あなたの国からのレビューのみ(Japan)
  • September-28 2020 03:55:07

    So far everything works fine. The only issue I had is the screws for the lead screw bearing guides were too big. They did not fit the T-Nuts and the holes in the guides so I had to get the right ones as you can see in the photos.

    コメント
  • September-13 2020 18:16:56

    Arrived quicker than expected, well packed, all items of good quality. There was an unexpected bonus of a surprisingly comprehensive tool kit !

    コメント
  • VIP3
    CA
    November-24 2020 11:37:18

    works well with no issues. installed quickly with pictures from the makers web site

    コメント
  • November-10 2020 08:48:18

    Good quality components and works great, everything fits well and was quick and easy to install. I had to switch the wires around on the stepper cable as the middle 2 wires needed to be crossed but this was very simple and easy to do with a little screw driver to lift and pull the connectors out. Delivery to the UK was pretty fast and the components were very well packaged in high impact foam to protect them during transit.

    コメント
  • October-24 2020 17:18:45

    Well, I have a mixed feeelings. The package is full of goods, everything what necessary for the assemblig are included. This means Z-stem, stepper motor, z-stepper bracket, coupler, z-threaded rod holder with bearings, z-nut, spacers for rollers, PSU alignment holder, y-cable, screws and nuts, wrench, Allen keys, screwdrivers and socket wrench are in. And a guide on funny paper with Bank Of China letterhead :) I have an Ender-3 Pro, bought May of 2019. But there are some misalignment in the kit: the

    コメント
  • October-20 2020 08:51:04

    I did buy this for my Ender 3 V2. Works very well, I just needed to add some washers that lead screw move smoothly because of different distance between left and right motor. I want to add direct extruder and because of adding weight I wanted to have two z-axis motors. I can recommend a buy.

    コメント (1)
  • January-10 2021 18:27:46

    Все нормально но мотор выше на 1.5 мм и хомут который соединяет ось с моторчиком некачественный незатягивает хорошо саму ось потом болт сломался

    コメント
  • December-31 2020 08:42:21

    Very good construction quality, all needed tools are present. Comes with instruction in english with a few explainatory pictures. Easy to assemble folowing instruction, but for the psu part which is tricky

    コメント
  • November-28 2020 09:52:27

    This upgrade works verry well , but attention with the cable who commes in the set , there was a wrong assembly , easy to fix , on the motor site you need the two middel connections twisted

    コメント
  • November-25 2020 10:49:21

    Good kit, but : - Z axis was inverted, I reversed the connector on mainboard - the PSU support is tricky to mount :no manual included, my ender 3 pro came with a PSU different from the one pictured here - power cables were too short to connect, I had to adapt (ie. drill) some holes

    コメント
Show:

    Total 0 pages

    Go to page

    Go

    あなたにおすすめの商品

    recommendation for you
    • 14,429円
    • 4,002円
    • 1,790円
    • 945円
    • 167円
    • 271円
    • 3,539円
    • 394円
    • 1,555円
    • 1,371円
    • 526円
    • 1,895円
    • 1,052円
    • 1,000円
    • 451円
    • 947円
    • 1,317円
    • 3,159円