5個のESP32 ESP32S 18650バッテリーチャージシールドV3マイクロUSBタイプA USB 0.5Aテスト充電保護基板
レビューの一部は自動翻訳されています。
全て予想通り!! 3V出力は実際には3.3Vで、ESP8266とESP32をミニUPSとして良好に動作
了解
インとアウトのUSBで18650、および3Vと5Vのための複数の接続のための非常に簡単なホルダー。 Arduinoの5Vから7Vに置き換える抵抗を探してみてください。
These charger boards are pretty OK. They're well made though one may wonder why they decided to put the LEDs on the bottom of the board rather than on the 18650 side: that's a pretty weird design decision. The markings says 3V but it is actually delivering 3.3V. The switch cuts the power of the USB output plug only, the three 3.3V and three 5V outputs are always ON. Some flux remains on the PCB. I had to bend the clips inside the 18650 holder to avoid the 18650 sleeve getting damaged when removing the battery. Overall, nice boards despite the horrendous and persistent smell of the plastic holder.
これらのバッテリーモジュールは素晴らしいです。 5つ追加しましたので、とても役に立ちました。
この小さな18650バッテリーモジュールは本当に良いです。 私は最近古いノートパソコンのバッテリーから掃除した18650バッテリーと一緒に使用するものを注文したばかりです。
すべてOK 感謝
seems fine never tested
部品は4週間以内にスイスに到着しました。 彼らはすべて良い外観、2つの部品テスト、彼らはうまく機能します。
良いモジュール - それは機能します。