I have these paired with the Emax RS2306 2400kv motors and so far so good. They don't get hot and have all the power I could need on tap with a Gemfan 5152 tri-blade prop. They are a little larger than your average ESC, but they still fit nicely on a Armattan Chameleon frame. To give them a little more protection I had some 3mm red acrylic cut. Then stuck it on top of the ESC's with tiny strips of double sided foam tape. Also heat shrink wrap either side to cover where the wires are soldered and hold the acrylic on better. The ESC is foam taped to the arm to prevent any chance of shorting out on the carbon.

I have these paired with the Emax RS2306 2400kv motors and so far so good. They don't get hot and have all the power I could need on tap with a Gemfan 5152 tri-blade prop. They are a little larger than your average ESC, but they still fit nicely on a Armattan Chameleon frame. To give them a little more protection I had some 3mm red acrylic cut. Then stuck it on top of the ESC's with tiny strips of double sided foam tape. Also heat shrink wrap either side to cover where the wires are soldered and hold the acrylic on better. The ESC is foam taped to the arm to prevent any chance of shorting out on the carbon.

I have these paired with the Emax RS2306 2400kv motors and so far so good. They don't get hot and have all the power I could need on tap with a Gemfan 5152 tri-blade prop. They are a little larger than your average ESC, but they still fit nicely on a Armattan Chameleon frame. To give them a little more protection I had some 3mm red acrylic cut. Then stuck it on top of the ESC's with tiny strips of double sided foam tape. Also heat shrink wrap either side to cover where the wires are soldered and hold the acrylic on better. The ESC is foam taped to the arm to prevent any chance of shorting out on the carbon.

Muy buena calidad los puedes poner con el motor que quieras

Muy buena calidad los puedes poner con el motor que quieras

Muy buena calidad los puedes poner con el motor que quieras

Much bigger than the 30A version. But its ok. I use them for F60 Pro motors and they work good. But since i use these i have a lot of noise in my video signal.

Much bigger than the 30A version. But its ok. I use them for F60 Pro motors and they work good. But since i use these i have a lot of noise in my video signal.

Much bigger than the 30A version. But its ok. I use them for F60 Pro motors and they work good. But since i use these i have a lot of noise in my video signal.

I am running these ESCs with some Emax 2306 2400KV on heavy 6inch props, and they handle the setup beautifully! My recommendation..

I am running these ESCs with some Emax 2306 2400KV on heavy 6inch props, and they handle the setup beautifully! My recommendation..

I am running these ESCs with some Emax 2306 2400KV on heavy 6inch props, and they handle the setup beautifully! My recommendation..

good

good

good

very good item for the best performance in this class.

very good item for the best performance in this class.

very good item for the best performance in this class.

Добротные регули. Чуть жирнее чем 30А и с радиатором.

Добротные регули. Чуть жирнее чем 30А и с радиатором.

Добротные регули. Чуть жирнее чем 30А и с радиатором.

Nice little Blheli_s 40A esc. fit well on my X6R frame. Lot of power and nice quality.

Nice little Blheli_s 40A esc. fit well on my X6R frame. Lot of power and nice quality.

Nice little Blheli_s 40A esc. fit well on my X6R frame. Lot of power and nice quality.

Los mejores esc

Los mejores esc

Los mejores esc

Buena calidad-precio

Buena calidad-precio

Buena calidad-precio