14/02/2017
I received 40Pin 2 Channel 6 Bit LED LCD LVDS Screen Cable.
Quickly sent and in 20 days I was in a receiving place.
Connections, soldering, appearance the accurate.
Now about the main thing.
Contacts of scaler settle down so that since the 7th conclusion on 30 there is a data transmission, synchronization (conclusions - 13, 14, 25, 26 it is Ground). And as the cable 2 Channel 6 Bit, conclusions - 17, 18 and 29, 30 aren't used. Watch the .01.jpg rice.
That is on even conclusions there have to be only signals with a sign (+), and on odd with a sign (-).
Color has to be one color for (+) wires and other color for (-).
But as we see on the .1.jpg rice, 2.jpg that color of wires goes alternately.
Also there are doubts that on a block for a matrix they go where it is necessary. It is necessary to ring out all connections that everything was correct.
I chose a way - cut off wires at a block for a matrix, cleaned a braid to see what wire and where it is necessary to solder to a matrix.
Conclusion: producers - can do it and beautifully looks when color of wires alternates on which data are transferred, but it isn't correct.
Получил 40Pin 2 Channel 6 Bit LED LCD LVDS Screen Cable.
Быстро отправили и через 20 дней был в месте получения.
Соединения, пайка, внешний вид аккуратные.
Теперь о главном.
Контакты scaler располагаются так, что начиная с 7 вывода по 30 идет передача данных, синхронизация (выводы - 13, 14, 25, 26 это Ground). И так как кабель 2 Channel 6 Bit , то выводы - 17, 18 и 29, 30 не используются. Смотри рис.01.jpg.
То есть по четным выводам должны идти только сигналы со знаком (+), а по нечетным со знаком (-).
Цвет должен быть одного цвета для (+) проводов и другого цвета для (-).
Но как мы видим на рис.1.jpg, 2.jpg, что цвет проводов идет вперемешку.
И есть сомнения, что на колодке для матрицы они идут куда надо. Надо прозванивать все соединения, чтобы все было правильно.
Я выбрал путь - обрезал провода у колодки для матрицы, убрал оплетку, чтобы видеть какой провод и куда надо припаять к матрице.
Вывод : производители - может это и красиво смотрится, когда цвет проводов чередуется по которым передаются данные, но это не правильно.
I received 40Pin 2 Channel 6 Bit LED LCD LVDS Screen Cable.
Quickly sent and in 20 days I was in a receiving place.
Connections, soldering, appearance the accurate.
Now about the main thing.
Contacts of scaler settle down so that since the 7th conclusion on 30 there is a data transmission, synchronization (conclusions - 13, 14, 25, 26 it is Ground). And as the cable 2 Channel 6 Bit, conclusions - 17, 18 and 29, 30 aren't used. Watch the .01.jpg rice.
That is on even conclusions there have to be only signals with a sign (+), and on odd with a sign (-).
Color has to be one color for (+) wires and other color for (-).
But as we see on the .1.jpg rice, 2.jpg that color of wires goes alternately.
Also there are doubts that on a block for a matrix they go where it is necessary. It is necessary to ring out all connections that everything was correct.
I chose a way - cut off wires at a block for a matrix, cleaned a braid to see what wire and where it is necessary to solder to a matrix.
Conclusion: producers - can do it and beautifully looks when color of wires alternates on which data are transferred, but it isn't correct.
Получил 40Pin 2 Channel 6 Bit LED LCD LVDS Screen Cable.
Быстро отправили и через 20 дней был в месте получения.
Соединения, пайка, внешний вид аккуратные.
Теперь о главном.
Контакты scaler располагаются так, что начиная с 7 вывода по 30 идет передача данных, синхронизация (выводы - 13, 14, 25, 26 это Ground). И так как кабель 2 Channel 6 Bit , то выводы - 17, 18 и 29, 30 не используются. Смотри рис.01.jpg.
То есть по четным выводам должны идти только сигналы со знаком (+), а по нечетным со знаком (-).
Цвет должен быть одного цвета для (+) проводов и другого цвета для (-).
Но как мы видим на рис.1.jpg, 2.jpg, что цвет проводов идет вперемешку.
И есть сомнения, что на колодке для матрицы они идут куда надо. Надо прозванивать все соединения, чтобы все было правильно.
Я выбрал путь - обрезал провода у колодки для матрицы, убрал оплетку, чтобы видеть какой провод и куда надо припаять к матрице.
Вывод : производители - может это и красиво смотрится, когда цвет проводов чередуется по которым передаются данные, но это не правильно.
I received 40Pin 2 Channel 6 Bit LED LCD LVDS Screen Cable.
Quickly sent and in 20 days I was in a receiving place.
Connections, soldering, appearance the accurate.
Now about the main thing.
Contacts of scaler settle down so that since the 7th conclusion on 30 there is a data transmission, synchronization (conclusions - 13, 14, 25, 26 it is Ground). And as the cable 2 Channel 6 Bit, conclusions - 17, 18 and 29, 30 aren't used. Watch the .01.jpg rice.
That is on even conclusions there have to be only signals with a sign (+), and on odd with a sign (-).
Color has to be one color for (+) wires and other color for (-).
But as we see on the .1.jpg rice, 2.jpg that color of wires goes alternately.
Also there are doubts that on a block for a matrix they go where it is necessary. It is necessary to ring out all connections that everything was correct.
I chose a way - cut off wires at a block for a matrix, cleaned a braid to see what wire and where it is necessary to solder to a matrix.
Conclusion: producers - can do it and beautifully looks when color of wires alternates on which data are transferred, but it isn't correct.
Получил 40Pin 2 Channel 6 Bit LED LCD LVDS Screen Cable.
Быстро отправили и через 20 дней был в месте получения.
Соединения, пайка, внешний вид аккуратные.
Теперь о главном.
Контакты scaler располагаются так, что начиная с 7 вывода по 30 идет передача данных, синхронизация (выводы - 13, 14, 25, 26 это Ground). И так как кабель 2 Channel 6 Bit , то выводы - 17, 18 и 29, 30 не используются. Смотри рис.01.jpg.
То есть по четным выводам должны идти только сигналы со знаком (+), а по нечетным со знаком (-).
Цвет должен быть одного цвета для (+) проводов и другого цвета для (-).
Но как мы видим на рис.1.jpg, 2.jpg, что цвет проводов идет вперемешку.
И есть сомнения, что на колодке для матрицы они идут куда надо. Надо прозванивать все соединения, чтобы все было правильно.
Я выбрал путь - обрезал провода у колодки для матрицы, убрал оплетку, чтобы видеть какой провод и куда надо припаять к матрице.
Вывод : производители - может это и красиво смотрится, когда цвет проводов чередуется по которым передаются данные, но это не правильно.