動作

It works

動作

Das Panzer Chassis kommt in in einer gut geschützten Verpackung. Die Qualität das Chassis ist sehr gut.

Das Panzer Chassis kommt in in einer gut geschützten Verpackung. Die Qualität das Chassis ist sehr gut.

Das Panzer Chassis kommt in in einer gut geschützten Verpackung. Die Qualität das Chassis ist sehr gut.

製品は14日後に到着しました。 問題ない まだ試してない すべてのピースはプラスチックです。 製品説明書に記載されています。

Ürün 14 gün sonra geldi. Herhangi bir sorun yok. henüz denemedim. bütün parçalar plastik. Ürün açıklamasında yazıldığı şekilde.

製品は14日後に到着しました。 問題ない まだ試してない すべてのピースはプラスチックです。 製品説明書に記載されています。

Perfect robust I recomend use 6V to 74 (2x18650). In my setup I use DasMikro itens (in special DasMikro 2S6A dual bi-direcional Brushed ESC #1022413 banggood product id. Tks

Perfect robust I recomend use 6V to 74 (2x18650). In my setup I use DasMikro itens (in special DasMikro 2S6A dual bi-direcional Brushed ESC #1022413 banggood product id. Tks

Perfect robust I recomend use 6V to 74 (2x18650). In my setup I use DasMikro itens (in special DasMikro 2S6A dual bi-direcional Brushed ESC #1022413 banggood product id. Tks

完璧で優れたパッケージング

perfetto ed ottimo imballaggio

完璧で優れたパッケージング

非常に良い15日高速船積み。

çok iyi 15 gün hızlı kargo.

非常に良い15日高速船積み。

Nice product. same as described and in images. Tracks are smooth and build quality is also good. Good for beginners.

Nice product. same as described and in images. Tracks are smooth and build quality is also good. Good for beginners.

Nice product. same as described and in images. Tracks are smooth and build quality is also good. Good for beginners.

3Dプリンタがあれば、安価なローバーのための素晴らしいスタート。 このデザインは、cattern dot comで見つけたものです。

A great start for a inexpensive rover if you have a 3D printer. I found these designs at cattern dot com.

3Dプリンタがあれば、安価なローバーのための素晴らしいスタート。 このデザインは、cattern dot comで見つけたものです。

المنتج جيد و جميل

المنتج جيد و جميل

المنتج جيد و جميل

the first 1 was broken badly CS sent out a new 1 right away it was also broken but was fixable, just 1 small piece in the rear a little CA glue and good 2 go. I went with a APM 2.6 controller a 200mw vtx and 1000tvl ccd camera with pan and tilt, drive motors are powered with 1200mah 7.2 2s and small 3s for APM and fpv system gets around great with run times at 10 plus. minutes the only head scratcher was getting the correct skid steer setting in mission planner. it seems to have plenty of power will almost climb straight up over obstacles even with the breakage I would buy again

the first 1 was broken badly CS sent out a new 1 right away it was also broken but was fixable, just 1 small piece in the rear a little CA glue and good 2 go. I went with a APM 2.6 controller a 200mw vtx and 1000tvl ccd camera with pan and tilt, drive motors are powered with 1200mah 7.2 2s and small 3s for APM and fpv system gets around great with run times at 10 plus. minutes the only head scratcher was getting the correct skid steer setting in mission planner. it seems to have plenty of power will almost climb straight up over obstacles even with the breakage I would buy again

the first 1 was broken badly CS sent out a new 1 right away it was also broken but was fixable, just 1 small piece in the rear a little CA glue and good 2 go. I went with a APM 2.6 controller a 200mw vtx and 1000tvl ccd camera with pan and tilt, drive motors are powered with 1200mah 7.2 2s and small 3s for APM and fpv system gets around great with run times at 10 plus. minutes the only head scratcher was getting the correct skid steer setting in mission planner. it seems to have plenty of power will almost climb straight up over obstacles even with the breakage I would buy again