お客様レビュー

4.94 から 5
レビューを書きます。
  • すべてのレビュー (18)
  • 画像 (5)
  • ビデオ (0)
  • オールスター
    • オールスター(18)
    • 5スター(17)
    • 4スター(1)
    • 3スター(0)
    • 2スター(0)
    • 1スター(0)
並び替え:
トップレビュー
  • トップレビュー
  • 最も役立つ
  • 新着商品
  • July-06 2020 14:42:35

    Excellent little plane! This is my second one as I have bought two for both sons to learn to fly. It goes together great. The first one I used all the recommended accessories but I found the 5G recommended servos did not fit the plastic servo tray without major cutting and sanding. For the second plane I used the recommended motor and ESC but for the servos I purchased a pair of K-power P0043 4.3g servos. They dropped into the mount easily without any cutting or modifying. They are slightly smaller

    コメント (1)
  • June-04 2020 20:16:16

    the plastic parts are 3D printed not molded. the main piece that holds the servos is a horrible design. no 5g servo will fit without significant cutting and hacking. the rest of the plane went together well, there are no instructions. I found some picture instructions for it on another site selling it. the CG is too far aft. By the 30% chord rule the cg should be 2 5/16” from the leading edge which balances perfectly with a 2s 1000 and the recommended motor. I have not flown it yet because I’m

    コメント (1)
  • July-26 2020 22:43:00

    IT IS OK

    コメント
  • October-27 2019 10:22:34

    Great little plane. Using a Detrum RXC7 Receiver, a Sonic 1806 2400kv motor, a Flycolor Fairy 30 amp ESC and a Tartu 800mAh 2 cell 45c battery, total overkill but but works great.... check it out.

    コメント (1)
  • August-17 2019 09:49:47

    super avion pour débuter

    コメント
  • June-05 2020 12:48:08

    Great little plane to build. really accurate and easy to do. took me less that 2 hours. I purchased the recommended servo’s, ESC, motor and props. The only issue I found was that the recommended servo’s don’t fit out of the box! I had to cut away at the servo mount quite a bit to get them sorted. This took more time than the whole aircraft to build! Either the servo box needs modifying or the correct servo’s recommended. Otherwise a great little plane but I have not got to fly it yet.

    コメント
  • BudVIP4
    US
    March-29 2020 16:04:49

    Easy kit to build except the recommended servos are too big to fit the servo tray. Had to cut down the servos and the plastic tray to install the servos. The pushrod wires were too stiff and too large to fit inside the carbon rod fuselage. Had to install one pushrod outside the fuselage

    コメント
  • October-21 2020 03:44:06

    Arrived undamaged. As models go this one looks quite primitive, lika something you could build yourself. But it's pretty thought out. The wing area is pretty big compared to it's size, so in a light build it should be a really nice, slow flyer.

    コメント
  • May-26 2020 13:47:44

    maybe a fc will fit 90 degrees ? nice little plane strong small will fpv. see tommyboytomsters YouTube coming soon review video

    コメント
  • November-20 2020 14:42:14

    looks great . not assembled yet

    コメント
Show:

    Go to page

    Go

    あなたにおすすめの商品

    recommendation for you
    • 3,342円
    • 2,245円
    • 8,027円
    • 4,964円
    • 2,419円
    • 6,750円
    • 2,636円
    • 9,506円
    • 5,915円
    • 4,660円
    • 8,133円
    • 10,140円
    • 7,288円
    • 3,070円
    • 17,429円
    • 12,026円
    • 7,763円
    • 7,668円